|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-02-2009, 12:48 PM | #1 |
Not Yet Wild
Join Date: Nov 2009
Posts: 43
|
G9 Input Shaft?
My driven clutch was making a racket so I took it off and noticed that the bushing in the sliding sheave was completely wasted and it seems like the shaft coming out of the rear end is worn too. Does this need to be replaced or will an new sliding sheave fix the problem?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2009, 02:15 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G9 Input Shaft?
That will depend on how much wear is on the shaft. Can you measure it?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Input shaft | Electric EZGO | |||
Input Shaft question | Electric EZGO | |||
Rethreading input shaft | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts | |||
94 medalist input shaft | Electric EZGO |