|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-06-2009, 05:21 PM | #1 |
Getting Wild
Join Date: Jan 2009
Location: Florida
Posts: 84
|
Replacing g16 ignition coil how to?
Ok how the heck do you get to this thing? I started taking the plastics off the side of the engine but don't see how to reach the last 1 or 2 on the bottom. Unless maybe you unbolt the motor and tilt it or remove the fuel tank? Some insight would be appreciated. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2009, 08:56 PM | #2 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: Replacing g16 ignition coil how to?
first disconect the battery
you will need to loosen the 4 motor mounts & swing the engine sideway to access the 2 last bolts , then remove the plastic cover then flywheel with a steering wheel puller & its right underneat 2 bolts you have the cdi unit off |
12-06-2009, 09:01 PM | #3 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Replacing g16 ignition coil how to?
I have replaced several with out unbolting the engine.
|
12-06-2009, 09:27 PM | #4 |
Getting Wild
Join Date: Jan 2009
Location: Florida
Posts: 84
|
Re: Replacing g16 ignition coil how to?
|
12-07-2009, 05:02 PM | #5 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Replacing g16 ignition coil how to?
I think I used 1/4" drive with swivel for lower bolts and went under cart to get to them. The plug boot screws on to wire. Unscrew then rescrew on new one.
|
12-07-2009, 05:03 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,862
|
Re: Replacing g16 ignition coil how to?
The spark plug cap is screwed onto the coil wire (remove it counter clockwise), another trick is to use a match book cover between the the flywheel and coil, it will give you the correct gap. No need to remove the flywheel.
|
12-08-2009, 02:04 AM | #7 |
Getting Wild
Join Date: Jan 2009
Location: Florida
Posts: 84
|
Re: Replacing g16 ignition coil how to?
Ok all good to hear I'll be trying to get it off my next day off ill let you guys know how it goes.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Ignition coil | Gas EZGO | |||
ignition coil | Gas EZGO | |||
87 91 ignition coil | Gas EZGO | |||
testing ignition coil | Gas Yamaha | |||
Ignition Coil Question | Gas Yamaha |