|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-17-2010, 08:57 PM | #1 |
Not Yet Wild
Join Date: Dec 2009
Location: st thomas ontario
Posts: 31
|
Well G1 was stripped.
But i never took no pics guys sorry. I got my fatherinlaw doin all the welding as thats what he did, and its going to a maximum 4 inch lift. But i was wondering the tie rods do i make them longer or shorter or do i turn them out to bring in my wheel toe? Do yous know what i mean. My wheels seem to be pointing left and right instead straight. But with the lift done ill post pictures. Im hoping to get the engine back this week i hope as well.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2010, 11:14 PM | #2 |
Gone Wild
Join Date: Jun 2009
Location: Canada
Posts: 358
|
Re: Well G1 was stripped.
You should raise your pick-up point for the tie rods on your spindle 4" also to keep the same geometry as stock. the toe should be close,but you can adjust it by turning the ball joint in or out.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
89 EZGO 19 Spline Coupler Stripped. Help? | Electric EZGO | |||
Stripped Hubs | Electric EZGO | |||
Stripped out studs on FNR assemble | Electric EZGO | |||
Stripped splines on rear hub | Electric Yamaha | |||
Stripped golf cart axle | Electric EZGO |