|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-29-2010, 11:24 PM | #1 |
Not Yet Wild
Join Date: Jan 2010
Location: Fort Worth, texas
Posts: 16
|
Hooking up new G9 engine
I just put a new yamaha engine in my G9. I need some help making a few connections...to the fuel pump, and vacuum lines. I took the engine out a month ago and now cannot remember the connections. Pictures of the fuel pump and where lines go would be a big help. Picture of engine with vacuum line hookups. Where does the vacuum line from the air cleaner go? Somebody help please. There is a hose connection at the bottom front of the engine, where does it go?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-30-2010, 09:19 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Hooking up new G9 engine
The port on the front of the motor between the starter and motor is the vacuum port. (fuel pump and check valve go there) Hope pictures help, vacuum inlet port on fuel pump is on the top cover, the other 2 are fuel in-fuel out.
|
01-30-2010, 09:44 AM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Hooking up new G9 engine
Oh, buy the way,FW, welcome to the site!!
|
01-30-2010, 09:45 AM | #4 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: Hooking up new G9 engine
the bigest hole on the fuel pump is the inlet from the fuel tank
the one closet to the engine the outer part of the pump is the vaccum line the other one goes to the carb |
01-30-2010, 09:55 AM | #5 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Hooking up new G9 engine
Thanks cart, always learn something from you guys!
Mike |
01-30-2010, 11:26 AM | #6 |
Not Yet Wild
Join Date: Jan 2010
Location: Fort Worth, texas
Posts: 16
|
Re: Hooking up new G9 engine
Thanks to you all. It runs better when it's hooked up correctly. B
|
01-30-2010, 11:58 AM | #7 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Hooking up new G9 engine
Good deal, Enjoy!
Mike |
01-31-2010, 07:59 PM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Hooking up new G9 engine
Very nice work here Mike!! Did I miss a thread with pics of your cart?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-31-2010, 09:39 PM | #9 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Hooking up new G9 engine
ya mike that is a super clean engine! did you polish the valve cover? looks sharp!
|
01-31-2010, 11:32 PM | #10 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Hooking up new G9 engine
Thanks Ron, and no you didn't miss it. I haven't done a picture thread, cause I don't know how. Got it done in Nov. I tore it down to bare frame,sanded and cleaned before paint. Then just detailed each part as I reassembled it. Came out real good as I haven't put a wrench on it since! I've driven it close to 300mi. and it just hums along happy!
Saber, yes I did polish the valve cover, and thanks for the comps. I just want to help people the way you all have helped me! This site has the greatest members!!! Didn't mean to hi jack- but thanks Mike |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hooking up accessories through the ignition switch ? | Gas Yamaha | |||
Hooking up lights | Electric Club Car | |||
Hooking up CGR-106 Charge Meter | Electric golf carts | |||
hooking up neon lights | Electric EZGO | |||
Trouble hooking up PB-6...wiring | Electric Club Car |