|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-03-2010, 01:35 PM | #1 |
Not Yet Wild
Join Date: May 2009
Posts: 20
|
G16 - Clip from Cable to Carb
Does anybody know the name/# of the little E or C Clip that connects the top of the Carb to the cable? I dropped mine when I had the carb off of the cart, and now I'm having a hell of a time finding it. Thanks!
-jim |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2010, 01:50 PM | #2 | |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: G16 - Clip from Cable to Carb
Quote:
Go to, http://www.buggiesgonewild.com/gas-y...s-catalog.html Down load the parts manual and identify your part Good luck |
|
03-03-2010, 02:00 PM | #3 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: G16 - Clip from Cable to Carb
I don't think calling it by name is gonna help find it......
|
03-03-2010, 02:21 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 - Clip from Cable to Carb
Maybe this will help > http://www.tntgolfcar.com/yamparts.php?diagramid=70
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-03-2010, 02:25 PM | #5 |
Not Yet Wild
Join Date: May 2009
Posts: 20
|
Re: G16 - Clip from Cable to Carb
Problem is it isn't in any of these diagrams. So, once you lay the accelerator and choke cables into the holders *(#4 on this diagram), there is a little clip that locks the cable into place....
|
03-03-2010, 04:59 PM | #6 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: G16 - Clip from Cable to Carb
use a small coter pin on a piece of mechanics cable
|
03-03-2010, 05:04 PM | #7 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: G16 - Clip from Cable to Carb
use a small coter pin on a piece of mechanics wire
|
03-03-2010, 08:56 PM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 - Clip from Cable to Carb
Try a lawn mower shop for a cable retainer.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-03-2010, 09:26 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 - Clip from Cable to Carb
In the parts lists, it's under the "intake" section. Part #7- Yamaha part # 99001-07600-00 its called a circlip, I call them "razzle frazzel" or worse, because I loose them all the time! If no dealer local, go to a good hardware store and look for "circlips/E-clips" in the fastener section. Should be a 7mm clip. I've seen cars run fine without the clip. One "fumble finger" guy to the next... Good luck Dave
|
03-03-2010, 11:06 PM | #10 |
Not Yet Wild
Join Date: May 2009
Posts: 20
|
Re: G16 - Clip from Cable to Carb
Thanks a lot!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
91 2 Cycle Carb Missing Carb Screw | Gas EZGO | |||
EZ GO Throttle cable/carb modification | Gas EZGO | |||
New to me G1, G2 or G16 front clip swap? | Gas Yamaha | |||
Windshield clip | Electric Club Car | |||
G1 Carb. jet on outside of carb ? What the Heck ? | Gas Yamaha |