|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-10-2010, 11:00 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 19
|
1980 G1 swing arm
I cut the swing arm on mine and made it 19 inches longer so the engine and trans will mount on it,the engine will be right in the center of the cart,I just moved the mounting tabs up to the crossmember right under the seat im going to put about 4 inches of lift on the cart anybody else done this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-11-2010, 06:30 PM | #2 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 1980 G1 swing arm
Nope, not me........why?
|
05-11-2010, 08:30 PM | #3 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: 1980 G1 swing arm
Quote:
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
05-11-2010, 08:53 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: 1980 G1 swing arm
Isn't that how they do the air shock carts that lift way up? It should work fine.
|
05-11-2010, 09:06 PM | #5 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: 1980 G1 swing arm
I cut added 4.5 inches and bent at 25 deg 19 seems a little much
|
05-11-2010, 10:03 PM | #6 |
Not Yet Wild
Join Date: May 2010
Posts: 19
|
Re: 1980 G1 swing arm
Its only 4.5 inches longer than stock to reach the next crosmember, i just replaced 19 inches of pipe because it was rusted from the battery acid.
|
05-11-2010, 10:16 PM | #7 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 1980 G1 swing arm
Well that's not how it reads in the first post...........
|
05-12-2010, 05:01 AM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: 1980 G1 swing arm
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
05-12-2010, 05:37 AM | #9 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: 1980 G1 swing arm
i thought it was extended 19" from stock also....i was thinking "that thing has to hang out there a TON!"
|
05-12-2010, 09:22 AM | #10 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: 1980 G1 swing arm
Would have been a nice hill climber with 19" and 100HP.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
swing arm rubber snubber? | Gas Club Car | |||
Help with swing arm design | Lifted Golf Carts | |||
Help with swing arm design | On Road Golf Carts! | |||
Ez-go swing arm lift kit????? | Lifted Golf Carts | |||
G9 swing arm drop | Design Center |