|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-14-2010, 06:34 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Help Installing New Wire Harness in G2
Hi Everyone,
New to carts and have a Yamaha G2 Gas that had no spark. A few of the wires going to the igniter were torn so I went and purchased a new wire harness. I have a few questions on installing as I ran in to some problems with my hacked up old harness. There are 2 thin wires coming off the solenoid that should plug in to the harness. Can somebody tell me which connectors these wires plug in to on the wire harness? Next, there is one black male on the harness that seams to be by itself towards the middle of the harness. Does anyone know where this connector plugs in to on the cart? Last, I believe the wires going in to the reverse buzzer have different connections than what the original harness had. The connector on the buzzer is for flat females and the connectors that the harness came with is 1 male and 1 female round style connector. Should I splice in to the new harness and just connect them straight? Thanks, Jerry |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2010, 11:23 PM | #2 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: Help Installing New Wire Harness in G2
Scratch that. I found a wiring diagram and got everything working right. The cart now has spark! It's just not getting fuel now. I will be looking in to the carb and fuel pump.
|
05-15-2010, 03:25 PM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Help Installing New Wire Harness in G2
Also check the pulse hose that runs from the engine blick to the pump for cracks.
|
05-15-2010, 04:38 PM | #4 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: Help Installing New Wire Harness in G2
OK will do. I just pulled off the carb and it has definitely seen better days. The float bowl has surface rust and the seat was stuck and I ended up breaking the wire trying to remove it. I am going to buy a new carb I guess, but before I do I am going to open up the fuel pump to see the condition of that because I might buy one of them too. I will keep everyone updated and thank you for all of the input. I am finally starting to understand how a golf cart works.
|
05-15-2010, 04:42 PM | #5 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: Help Installing New Wire Harness in G2
Also, I need the air box lid, boot, snaps, and air filter, as my cart came with only the coffee can looking piece attached to the bottom of the cart. If anyone has one for sale please let me know!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 gas wiring harness | Gas Yamaha | |||
wiring harness | Gas Columbia ParCar | |||
wiring harness | Golf Carts and Parts | |||
Wire Harness EZGo ST | Gas EZGO | |||
G16 wiring harness with key $50 | Golf Carts and Parts |