Duffer,Are you out there?

aka rotten · 03-02-2008, 04:18 PM

Duffer i,m still havin problems trying to install brake lights,mabee you or someone can tell me where i went astray!Mounted switch tp pedal no problem there,harness instructions state to hook up switch with 2 ends from harness,next step wire from harness with fuse link say to install on 12 volt sorce,i hooked it directly to battery,only 2 wires left to hook up and directions state to hook tored wire comming from taillight,1st thing i noticed was brake lights work on marker lights in bulb kinda dull but liveable,then i noticed when i turn signal on all 4 blink!did replace flasher with heavy duty one thinken that would help but notta,is tail ligts supposed to have 2 bulbs in them? and buld is 2 filiment 2057 it says,lights do have 3 wires comming from them.what short of taking whole setup out and forgettin it would ya,ll recomend?Thanks in advance again.

duffer · 03-02-2008, 10:17 PM

Rotten
You have just moved past my field of expertise. I do know that the taillight bulb should be a 2057 that has 2 filaments. That bulb will handle taillights, dir. lights and brake lights. Someone else will have to help you through the wiring hookup. I can't trace my wires without taking the cart apart. Don't give up, you are closer than you think.

03-02-2008, 04:18 PM	#1
aka rotten Not Yet Wild Join Date: Dec 2007 Posts: 17	Duffer,Are you out there? Duffer i,m still havin problems trying to install brake lights,mabee you or someone can tell me where i went astray!Mounted switch tp pedal no problem there,harness instructions state to hook up switch with 2 ends from harness,next step wire from harness with fuse link say to install on 12 volt sorce,i hooked it directly to battery,only 2 wires left to hook up and directions state to hook tored wire comming from taillight,1st thing i noticed was brake lights work on marker lights in bulb kinda dull but liveable,then i noticed when i turn signal on all 4 blink!did replace flasher with heavy duty one thinken that would help but notta,is tail ligts supposed to have 2 bulbs in them? and buld is 2 filiment 2057 it says,lights do have 3 wires comming from them.what short of taking whole setup out and forgettin it would ya,ll recomend?Thanks in advance again.
aka rotten Not Yet Wild Join Date: Dec 2007 Posts: 17

03-02-2008, 10:17 PM	#2
duffer Not Yet Wild Join Date: Jan 2008 Posts: 4	Re: Duffer,Are you out there? Rotten You have just moved past my field of expertise. I do know that the taillight bulb should be a 2057 that has 2 filaments. That bulb will handle taillights, dir. lights and brake lights. Someone else will have to help you through the wiring hookup. I can't trace my wires without taking the cart apart. Don't give up, you are closer than you think.
duffer Not Yet Wild Join Date: Jan 2008 Posts: 4

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode