|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-15-2010, 05:02 PM | #1 |
Not Yet Wild
Join Date: Aug 2008
Posts: 9
|
Help,cart runs like crap after starter/generator brush replacement
Hello I have a '96 G14 and after installing new brushes it has very little power.Batery has 12.6 volts and doesnt change with engine running. If i just push pedal down about 1/4 of the way it runs smooth anything over 1/4 pedal and it cuts out and sometimes backfires.It ran fine before brush replacement.***For additional info see thread titled "G14 starting issue"
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2010, 06:35 PM | #2 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help,cart runs like crap after starter/generator brush replacement
Andy, I'll bump this up for ya: There is no logical reason a brush replacement would cause this, unless in the process you a ground was compromised. More than likely it is something else that just "Murphyd" you......
|
08-15-2010, 08:48 PM | #3 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Help,cart runs like crap after starter/generator brush replacement
You removed the air box to get to starter. Double check and make sure it is sealed good.
|
08-15-2010, 09:13 PM | #4 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Help,cart runs like crap after starter/generator brush replacement
Are you certain the motor is even running a quarter throttle?
When you change brushes, you have to make sure the brush leads do not hamper the movement of the brushes in their housing and that they make unobstructed contact with the armature. Drags are on, more later!! |
08-16-2010, 05:08 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Help,cart runs like crap after starter/generator brush replacement
Did the "jumper lead" from F1 to A2 get reattatched correctly?
|
08-16-2010, 07:46 PM | #6 |
Not Yet Wild
Join Date: Aug 2008
Posts: 9
|
Re: Help,cart runs like crap after starter/generator brush replacement
thaks for the input i checked airbox 3 times it is sealed good i realize it sounds rediculous it just doesnt make any sence im kinda leaning towards plug/carb issue
|
08-16-2010, 08:08 PM | #7 |
Not Yet Wild
Join Date: Jul 2010
Posts: 20
|
Re: Help,cart runs like crap after starter/generator brush replacement
Here something, but being new to the cart thing, do you need to flash the field? to repolerize it I seem to remember back in the day you had to do this when you did gen repairs........just a though and I've been wrong before...
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Starter Not Working? Brush Replacement | Gas Club Car | |||
starter generator belt replacement | Gas Club Car | |||
Got 87 marathon stuck in mud now runs like crap | Gas EZGO | |||
brush replacement | Electric EZGO | |||
G1 starter brushes and 2 brush springs for sale. | Golf Carts and Parts |