|
|||||||
| Notices | |
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | |
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
03-21-2008, 01:53 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Near Roseburg, Oregon
Posts: 46
 |
Shorter belt on a G8 4 person...
Building my G8 for a 4 person transported while at motorcycle races and such. Got 22" tires and a 6" lift. I put on the Jakes spring, was thinking about trying the shorter belt. Anyone have experience with it, and even better, a part number???? Thanks.......
|
|
|
|
|
|
|
03-21-2008, 07:41 AM
|
#2 |
|
b quiet
Join Date: Dec 2006
Location: in the creek
Posts: 8,299
|
Re: Shorter belt on a G8 4 person...
You can go with a shorter belt (I don't have a part number) but it will definitely take away from the top end 'considerably'. The spring/spacer torque kit is the best bet for torque and should pull what you need.
|
|
|
|
|
|
|
|
03-21-2008, 04:36 PM
|
#3 |
|
Getting Wild
Join Date: Nov 2007
Location: Gatineau qc. CANADA
Posts: 109
 |
Re: Shorter belt on a G8 4 person...
Make sure the front tensioner on the engine is tight
I pull 4 people on my cart & tow other carts uphill without a problem the white spring would probably work best for you I removed it & used plowman yellow spring better top end a bit less torque Plowman also have there own belt a bit wider & stronger |
|
|
|
|
03-21-2008, 06:39 PM
|
#4 | |
|
Not Yet Wild
Join Date: Mar 2008
Location: Near Roseburg, Oregon
Posts: 46
|
Re: Shorter belt on a G8 4 person...
Quote:
What is this front tentioner you speak of???? A picture would be nice... I got the Jakes power spring, and that helped a ton.... |
|
|
|
|
|
03-21-2008, 06:47 PM
|
#5 |
|
Getting Wild
Join Date: Nov 2007
Location: Gatineau qc. CANADA
Posts: 109
|
Re: Shorter belt on a G8 4 person...
its a small steel cable that goes from the motor mount on the drivers side to the frame it helps the engine from going to far backward especially if your motor mount are week
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Shorter Belts and 28 degree driven clutch | Gas EZGO | |||
| Shorter Belt? | Gas EZGO | |||
| Shorter belt | Gas EZGO | |||
| shorter belt ? | Gas EZGO | |||
Linear Mode
