|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-03-2010, 11:10 AM | #1 |
Not Yet Wild
Join Date: Oct 2008
Location: Macon, Ga.
Posts: 44
|
G9 head and valve ?
I am rebuilding my G9 and have removed the head and removed the exhaust valve but the intake valve will not come out. It slides very freely in the guides but when it gets to the end of the valve, where it is notched for the clip that holds the spring down, it will not slide out. Is there some sort of lockring or clip or something that I am missing? Any help?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-03-2010, 11:42 AM | #2 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: G9 head and valve ?
Unless the head was already reworked the exhaust didn't have a guide. I would assume you have a little burr on the valve tip that might need a little sanding, only thing that makes sense to me.......Have them put a new guide in the exhaust side when you have the head done.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat head valve lash?? | Gas Club Car | |||
97 Ez-Go Valve kit | Gas EZGO | |||
valve job | Gas Yamaha | |||
G1 exhaust valve | Gas Yamaha | |||
Valve Adjustment | Gas EZGO |