G16 primary clutch reassembly help needed

bigstik40

Hello to all:
I neglected to look at how my primary clutch was assembled before I took it apart, and now need some minor help during re-assembly. I don't know how the plastic weight spacers should be oriented on re-assembly. These are the odd shaped plastic spacers (with a finger), used between the weights and the retaining boss. Can anyone help with a picture or explanation how these fit. The factory picture of the assembly is not detailed enough to show this. Thanks for any help that can be provided.

Ray

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

TheNewGuy

I don't know the answer but maybe this will help? http://www.tntgolfcar.com/yamparts.php?diagramid=84

Ron


PLEASE VISIT Our Sponsors * BGW GEAR The Store

The G2 Project * Swing Arm Drop & Repair * Geep1 Project

bigstik40

HERE'S THE ANSWER

I reassembled the clutch and found the answer to my own question. When installing the weights, it became very clear that the little fingers on the plastic spacers are there to give you something to hold onto while you attempt to get the bolt lined up with the hole in the spacer. Without that "little finger" the job would be a royal PIA. Just thought I'd post the answer for anyone interested. HAPPY NEW YEAR !!

RAY