|
|||||||
| Notices | |
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | |
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
04-22-2008, 01:01 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 17
|
bad seals!!
well she is torn down and ready for the new seals. happen to have all the right pullers so things went pretty smooth. the seals were in pieces as you can see them lying next to the engine.since she has 120lbs compression im not breaking it down any further.
|
|
|
|
|
|
|
04-22-2008, 01:33 PM
|
#2 |
|
Site Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 5,606
|
Re: bad seals!!
Glad to hear it went well. Good pics!!
 |
|
Ron
If you can't run with the BIG DOGS...stay on the porch  Please Visit Our Sponsors TheBadBoyG9 * Frame Mod * New Exhaust Marathon Project |
|
|
|
|
|
04-22-2008, 01:41 PM
|
#3 |
|
b quiet
Join Date: Dec 2006
Location: in the creek
Posts: 8,299
|
Re: bad seals!!
Good post and thanks for the pic's.
|
|
|
|
|
|
|
|
04-22-2008, 08:58 PM
|
#4 |
|
Went Wild..Now Tame
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 816
|
Re: bad seals!!
Good job Mark6065! Now new crank seals and reassemble and good to go! Did you remember to "mark" the timing plate (to the block) for reassembly ? Nice pic's. Later dave
|
|
|
|
|
04-23-2008, 08:07 AM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 17
|
Re: bad seals!!
dave i set took a center punch and marked the case on top two times and once on the botton so i could re-position the timing plate exactly where it was. again thanks for your help dave.
|
|
|
|
Linear Mode
