Help Can't get front clutch off

LURCH

I can't seem to get the bolt out of the front clutch. Is it right or left hand threads? I dont have room to get my impact on it without using a extension and swivel or universal which ever you call it.
It will not break loose somebody help before I take a hammer to it.

Thank's LURCH!!!!!!!

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

smallblock450sl

Counterclockwise to take it off. If your real lucky, the "fixed sheave" will come off the crank, if not you'll need a special puller. Hope it comes off!

LURCH

Thanks I have the puller if I can get the bolt out. Its just hard to get to.

LURCH

4 ft pc of pipe works wonders!!!!!!!!!

DOOmsman

And now we know the rest of the story behind your name
LURCH.

LURCH

Well the real reason is I'm 6' 5" and about 310 lbs.

The clutches are off and one roller on each clutch has broke into and fell off. I'm doing two carts at the same time. How do you change them. Take a puller and separate the two pcs of the clutch or what??????????

LURCH

Does anyone know if these clutches just pull apart with a puller or a press??????????????
I just dont want to break them without knowing.

Flintrock

The spider unscrews, if I remember correctly it is left hand thread so it's backwards. They use some pretty tough Loctite so heat is usually required to get them off.

LURCH

There is no bolts or screws and the part I need off is the piece that opens and closes for lower gearing or higher gearing. This peice slides down into the other with like fingers so it want turn either way just in or out only. I'm thinking a three prong puller to hook the part I need off with the center bolt pushing down on the main part to push them apart. Hard to explain without seeing one.

Flintrock

That's the spider assembly, it unscrews from the shieve, and it is left hand threaded. The whole assembly turns off....