|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-24-2011, 11:32 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
G14, 16hp duromax install questions
I decided to skip the rebuilt since the balancer and a piston need to be replaced. Figured instead of spending the money on it, rather just put it towards something more powerful. I just purchased an electric start 16 hp duromax ($289 shipped, great deal I thought) from maxtool and a cvtech clutch from cpp. My question is, what all can I take off my cart to install the new motor? Don't need the generator/starter but what about the fuel pump, controller, solenoid, factory key switch, etc. I assume i could take ghis all out but just want to verify with you guys. I would like to use the factory gas tank since its so large but not sure if I still need the factory fuel pump. Any hep will be greatly appreciated!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-25-2011, 06:56 AM
|
#2 |
|
Redneck in Southside
 Join Date: Jul 2010
Location: Spencer, Virginia
Posts: 1,252
|
Re: G14, 16hp duromax install questions
I think you still need fuel pump ,most of the clone motors are gravity fed gas, will need a solenoid and a new switch like a lawn mower or car, some motors come with switch, hope this helps ,post some pics of your build ,we love pics
 |
|
|
|
|
05-25-2011, 07:52 AM
|
#3 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G14, 16hp duromax install questions
You can use your original fuel pump and that should be all you need. Everything else should come with the new engine.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-25-2011, 08:00 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
Re: G14, 16hp duromax install questions
Cool, thanks guys. Engine and clutch should be here this weekend but I want to get the cart all cleaned up so I can jump right into the install when it gets here. I'll post some pics once I get going so you guys can tell me what I'm doing wrong. Ha! Thanks again!
|
|
|
|
|
05-25-2011, 07:32 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 290
|
Re: G14, 16hp duromax install questions
you wont be sorry for the upgrade. still trying to get the pics of mine loaded. cant get them to load
|
|
|
|
|
03-14-2012, 06:28 PM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Re: G14, 16hp duromax install questions
So if a buy the duromax electric start and a clutch like you its fairly simple to install?
|
|
|
|
|
03-14-2012, 07:52 PM
|
#7 |
|
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: G14, 16hp duromax install questions
I would suggest keeping your starter generator so you will have a charging system if you plan on running lights.
|
|
|
|
|
| Tags |
| 16hp, clone, duromax, g14, yamaha |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Duromax 16HP | Clone Engine Swaps | |||
| duromax 16hp | Clone Engine Swaps | |||
| Duromax 16hp in Yamaha g14 | Clone Engine Swaps | |||
| 16HP Duromax Install? | Big Block Talk! | |||
| Duromax 16hp in 05 TXT? | Clone Engine Swaps | |||
Linear Mode
