82 G 1 rebuild

ecoleman · 07-06-2011, 09:49 PM

Hi, I'm new poster so here goes. I'm rebuilding a 82 Yamaha G 1 engine, and having trouble finding the correct head gasket and reed valve gasket. Any help with part numbers or parts lists, maybe manuals??

caddylac camper · 07-07-2011, 07:27 AM

yamahagolfcars.com has the parts manuals available for viewing and owners manuals for viewing or downloading. Just select your cart from the drop down menus.

RS Rogers · 07-07-2011, 06:04 PM

You should be able to get everything here
Mine is an 84 but & is a G1 just as yours should be & I got all the parts to do an over haul on mine there.

Steve

OOOPs looks like there is something different about the 82??????? but they show the gaskets your looking for as general & not specific to certain years. I believe they are on page 4 of the link .

Marathon Man · 07-07-2011, 06:48 PM

Ya thought I was the only one with an 82 lol

smallblock450sl · 07-07-2011, 07:28 PM

The head gasket is the same for all G1's (j10-11181-01-00). The reed gasket is (87a-13621-00-00). If you can't find the reed gasket, I think I have one I can mail you. Good luck on your project

ecoleman · 07-07-2011, 09:18 PM

Thanks so much for the replys. This gives me some things to follow. Thanks for the link and the part numbers. I've tried 2 head gaskets from 2 different companies and they seem a little too big. They fit the studs, but not very snug. I can move them around a little after I set it down on the studs???

sho305 · 07-07-2011, 09:52 PM

The 82 cylinder is a little different than other G1, I was under the impression it was porting and piston mostly but am not sure. If the gasket is outside the cylinder all the way around it should be ok. If it moves inside I'd not like that.

ecoleman · 07-29-2011, 09:45 PM

Well, still have not found the correct head gasket. Ordered another one from another supplier, and it was too large. Any help?

ecoleman · 08-05-2011, 09:08 PM

Anyone remember that link that was on a little while ago that showed the rebuild of a G 1 ???

07-06-2011, 09:49 PM	#1
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8	82 G 1 rebuild Hi, I'm new poster so here goes. I'm rebuilding a 82 Yamaha G 1 engine, and having trouble finding the correct head gasket and reed valve gasket. Any help with part numbers or parts lists, maybe manuals??
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8

07-07-2011, 07:27 AM	#2
caddylac camper Gone Wild Join Date: Feb 2011 Location: Winnipeg, Manitoba Posts: 177	Re: 82 G 1 rebuild yamahagolfcars.com has the parts manuals available for viewing and owners manuals for viewing or downloading. Just select your cart from the drop down menus.

07-07-2011, 06:04 PM	#3
RS Rogers Not Yet Wild Join Date: Sep 2009 Posts: 13	Re: 82 G 1 rebuild You should be able to get everything here Mine is an 84 but & is a G1 just as yours should be & I got all the parts to do an over haul on mine there. Steve OOOPs looks like there is something different about the 82??????? but they show the gaskets your looking for as general & not specific to certain years. I believe they are on page 4 of the link .
RS Rogers Not Yet Wild Join Date: Sep 2009 Posts: 13

07-07-2011, 06:48 PM	#4
Marathon Man Gone Wild Join Date: Aug 2010 Location: brooksville fl Posts: 412	Re: 82 G 1 rebuild Ya thought I was the only one with an 82 lol

07-07-2011, 07:28 PM	#5
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,875	Re: 82 G 1 rebuild The head gasket is the same for all G1's (j10-11181-01-00). The reed gasket is (87a-13621-00-00). If you can't find the reed gasket, I think I have one I can mail you. Good luck on your project

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-07-2011, 09:18 PM	#6
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8	Re: 82 G 1 rebuild Thanks so much for the replys. This gives me some things to follow. Thanks for the link and the part numbers. I've tried 2 head gaskets from 2 different companies and they seem a little too big. They fit the studs, but not very snug. I can move them around a little after I set it down on the studs???
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8

07-07-2011, 09:52 PM	#7
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: 82 G 1 rebuild The 82 cylinder is a little different than other G1, I was under the impression it was porting and piston mostly but am not sure. If the gasket is outside the cylinder all the way around it should be ok. If it moves inside I'd not like that.

07-29-2011, 09:45 PM	#8
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8	Re: 82 G 1 rebuild Well, still have not found the correct head gasket. Ordered another one from another supplier, and it was too large. Any help?
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8

08-05-2011, 09:08 PM	#9
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8	Re: 82 G 1 rebuild Anyone remember that link that was on a little while ago that showed the rebuild of a G 1 ???
ecoleman Not Yet Wild Join Date: Jul 2011 Posts: 8

Similar Threads
Thread	Forum
txt rebuild	Electric EZGO
G14 rebuild	Gas Yamaha
top end rebuild	Gas EZGO
fe 290 rebuild	Gas Club Car
'86 rebuild	Gas EZGO