Brake drums won't come off

johndgjr

I've got a G9 and we're trying to get it fixed up, but we can't
get the drums off to check the brakes. I don't won't to hammer enough
to break a drum. We've loosened the brakes but the drums won't budge.
Is there a puller or do I need to keep tapping and take my time.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Mike Mac

There are 2 6mm threaded holes if the face of each drum. Screw in a couple 6mm bolts and turn them each a quarter turn at a time and the drum should break loose.
Good luck, Mike

johndgjr

Thanks Mike, it worked like a charm.

Mike Mac

Good deal john, now use "never seize" on all moving parts of the brake assem. (small amount). Then I put a light film, very light on the axle flange that faces up to the inside of the brake drum. And you shouldn't have that problem again. I also put a very small amount on the stud threads. Next time you go into the water, you'll be happy you did.