|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-01-2011, 05:00 PM | #1 |
Getting Wild
Join Date: Nov 2011
Location: Minier IL
Posts: 112
|
bore clearances
I just measured bore on my g9, 71.8mm through out cylinder, specs say 73 mm, does anybody know if standard ring and piston set, will work?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-01-2011, 05:15 PM | #2 |
Getting Wild
Join Date: Nov 2011
Location: Minier IL
Posts: 112
|
Re: bore clearances
whoops false alarm, Remeasured i am at 72.9 mm or 2.87 Inches
|
12-01-2011, 05:31 PM | #3 |
Getting Wild
Join Date: Nov 2011
Location: Minier IL
Posts: 112
|
Re: bore clearances
I know what screwed me up, the book says 73mm (2.84in) I dont know how they figure that, my digital caliper does conversion for me, and then to double check it , I found conversion chart, which is the same has my caliper, so is it a mis-print or what?
|
12-01-2011, 07:42 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: bore clearances
Standard is 73.00-73.02mm or 2.874-2.875 in. Limit is 73.5mm or 2.876 in. Hope that helps
|
12-01-2011, 10:30 PM | #5 |
Getting Wild
Join Date: Nov 2011
Location: Minier IL
Posts: 112
|
Re: bore clearances
Thank you , thats great help
|
|
|
Similar Threads | ||||
Thread | Forum | |||
carb bore on g22 | Gas Yamaha | |||
341 bore questions?? | Gas Club Car | |||
89 clutch bore | Gas EZGO | |||
G14 Cylinder Bore Damaged | Gas Yamaha | |||
G1 bore | Gas Yamaha |