|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-17-2011, 06:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2011
Posts: 20
|
pulling clutch to replace seals
I need some help I have a clutch puller and have removed everything but i cant get the clutch to come off do i keep cranking the puller in the hole weven if it is bending the tool any suggestions
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-17-2011, 07:36 PM
|
#2 | |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: pulling clutch to replace seals
Quote:
|
|
|
|
|
|
12-17-2011, 07:43 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2011
Posts: 20
|
Re: pulling clutch to replace seals
I finally got it I wedged 2 to pieces of 2x4 wedges and crank it 2 more full turns and wham o popped right off now clean up replace seals and back together any tips I'm sure I'll need them thx
|
|
|
|
|
12-21-2011, 09:32 PM
|
#4 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: pulling clutch to replace seals
If it were me, I would put a very thin film of never seize on the mating surfaces of the clutch/crank.
good luck, Mike |
|
|
|
|
12-22-2011, 10:23 AM
|
#5 | |
|
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: pulling clutch to replace seals
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pulling a Drive Clutch | Gas EZGO | |||
| Pulling drive clutch off | Gas Yamaha | |||
| replace seals in a 3 pg | Gas EZGO | |||
| 87 EzGo Comet Drive Clutch seals | Gas EZGO | |||
| need help pulling clutch on G9 | Gas Yamaha | |||
Linear Mode
