![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
Thread Tools | Display Modes |
![]() | #21 |
Not Yet Wild Join Date: Sep 2013
Posts: 7
| ![]() How did he get the machined side gears to stay put in the mini spool? Don't see any welds or pins. Is it just a tight fit that is pressed together. Exploring my options and trying to get motivated to use my lathe instead of just welding them together on my 87' g2a. thoughts? |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #22 |
Getting Wild ![]() Join Date: Mar 2009 Location: Middletown, Missouri
Posts: 90
| ![]() He cut the gears off the very end of the splined collars which have the splines for the axles ends. Welded in a short piece, turned it down true and then pinned the whole thing. Still working very well. |
![]() | ![]() |
![]() | #23 |
Not Yet Wild Join Date: Sep 2013
Posts: 7
| ![]() That is what I thought, he just did too good of a job on the finish to tell if it was pinned. Well, I guess that is enough motivation for me. I am going to first try and design a small lockable diff setup, then if the space doesn't allow I will make a mini spool for full lock up. Now to try and figure out how to get my little 6inch atlas lathe to hold 2 inch stock in the 1 inch jaws. Will update with finished product. |
![]() | ![]() |
![]() | #24 |
Getting Wild ![]() Join Date: Mar 2009 Location: Middletown, Missouri
Posts: 90
| ![]() Good luck to you. The spool has made my cart much better in the woods while hunting. |
![]() | ![]() |
![]() | #25 |
Not Yet Wild Join Date: Sep 2013
Posts: 7
| ![]() What did you use for steel? And did you do the same as "never grow up" or come up with your own design? Last edited by Mainediesel; 09-28-2013 at 11:54 PM.. Reason: forgot something |
![]() | ![]() |
![]() | #26 |
Getting Wild ![]() Join Date: Mar 2009 Location: Middletown, Missouri
Posts: 90
| ![]() I am not sure what "never grow up" did with his design, I never got a chance to talk and ask him about his design. |
![]() | ![]() |
![]() | #27 |
Gone Wild ![]() Join Date: Nov 2013
Posts: 1,086
| ![]() |
![]() | ![]() |
![]() | #28 |
Not Yet Wild ![]() Join Date: Jan 2014 Location: Rogersville, Mo
Posts: 9
| ![]() How can I get this? |
![]() | ![]() |
![]() | #29 |
Gone Wild ![]() Join Date: Aug 2012 Location: Twin Falls Idaho
Posts: 540
| ![]() Hey "Never Grow Up" I am in for one for a G14. Tell me what I need to do and how much! |
![]() | ![]() |
![]() | #30 |
Seaching for "The Way" ![]() ![]() Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO)
Posts: 6,909
| ![]() Guys I don't think this guy comes here anymore. I've sent him multiple PM's with no response. There were two guys on here that built a spool for these carts, can't seem to get in touch with either one of them. ![]() |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
Mini Air Bags | Golf Carts and Parts | |||
Home made Rear Seat | Lifted Golf Carts | |||
posi locking/ spool locker for gas yamaha? | Lifted Golf Carts | |||
New to me Melex Mini T | Melex | |||
Mini T is HOTTTT Again. | Electric EZGO |