|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-31-2012, 06:36 AM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
What size socket
I have to rebuild my 81 g1, what size of socket do i need for the flywheel and the cluch?and what kind of pully for them? And the size bolt to get the cluch off?were can i buy the right pullys and the bolt?thank you people.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-31-2012, 09:30 PM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: What size socket
You're gonna need a harmonic balancer puller for the flywheel. And you will need a yamaha clutch puller bolt for the clutch( About $45 to $50) If you don't want to spend the money I heard you can put a rod in the crank and run a bolt into it to pop it off but the thread size is rare and hard to find.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Socket Size For G16 Spark Plug | Gas Yamaha | |||
Turnsignal Socket? | Electric Club Car | |||
socket size | Gas EZGO | |||
lighter socket,05 precident | Gas Club Car | |||
socket in dash | Electric Club Car |