|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-09-2012, 03:14 PM | #1 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
G1 carb, what goes in this opening?
Cleaning out my carb and have this threaded hole and in the bottom has small pin hole that is open to carb inside housing, anybody know what should be here?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2012, 03:45 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: G1 carb, what goes in this opening?
There are several versions of this carb, but on mine there is nothing there. What are the #'s on your carb?
|
02-09-2012, 04:17 PM | #3 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
It starts j10, found a diagram for a G1 carb almost the same just slightly different on TNT and it shows a pilot adjust screw n spring should be there, there is a small pin hole so I think it is
|
02-09-2012, 04:20 PM | #4 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Opened up carb and found all this crap in it, hopefully found my problem cause I can start it and keep running by spraying fuel mix in carb
|
02-09-2012, 04:50 PM | #5 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: G1 carb, what goes in this opening?
Yep, you are missing the low speed mixture screw and spring.
Might try Yamaha Dealer or ebay or someone here might have a donor for sale. |
02-09-2012, 04:55 PM | #6 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: G1 carb, what goes in this opening?
Mikuni rebuild kits with the needle are available, while waiting
tear it down all the way and clean every thing with a torch cleaning kit. |
02-09-2012, 05:03 PM | #7 |
Not Yet Wild
Join Date: Dec 2011
Location: sun city center fla
Posts: 8
|
Re: G1 carb, what goes in this opening?
Hi my carb looks just yours it is a j10 also the guys are right there is an adjustment screw there I found my YAMAHA dealer can get parts for a 28mm carb they can cross referance the part to other 4 wheelers or sleds of about the same vintage as our cart. It takes a little work. good luck
|
02-09-2012, 06:03 PM | #8 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Local cart dealer gave it to me for free cause it had been sitting on shelf for so long, being an old G1 worked in my favor haha
|
02-09-2012, 06:05 PM | #9 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
The pic shows the package for the screw with the part#, the spring is the same # just a 2 in place of the list 1
|
02-09-2012, 06:45 PM | #10 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Ok one more question then should be done with carb, the other adjust screw says its the jet pilot, should that be seated all the way down? Because this one was
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Opening up a Curtis 1238 AC controller? | Electric golf carts | |||
Opening a DCS Controller | Electric EZGO | |||
need used carb or carb parts (87 ezgo) | Golf Carts and Parts | |||
frame opening | Electric EZGO | |||
91 2 Cycle Carb Missing Carb Screw | Gas EZGO |