Engine case

makobuggie

Whats the best way to split a engine case? And removeing old gasket? They used silocon on the gasket. Thanks.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

jackel440

Use a rubber mallet or dead blow hammer to shock the case apart.Then use a paint scraper or razor blade to remove the rtv.You can also then use a scotch bright pad to clean up the surface to make sure all the rtv is gone.

sho305

Those scotch pads work awesome if you have a die grinder, I use those on near any gasket surface. They don't take off any metal unless you really hammer on them. I mean the ones that go on a grinder not the hand pads, which I also have used a lot especially for paint prep. You can also use those with solvents to clean things.

yamarancher

I used oven cleaner on my engine parts, makes the grease go away & the aluminum look brand new !

toadady

if you look reallllllllllly close there are a couple of spots where you can stick a screwdriver in it to pry in the suggested spots.