|
| |||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
| | Thread Tools | Search this Thread | Display Modes |
03-12-2012, 02:25 AM
| #1 |
| Gone Wild Join Date: Jul 2011
Posts: 265
|  Crank case screws Hello everybody, i took my g1 apart to rebuild, and all the crank case phillips head stripped out the head so i had to use a extractor to get them out , so i went to the hardware store and bought some bolts for replacement, it should work better with a socket, i wanted to know do the bolts have to hardend? Im thinking it should be? Thanks. |
|  |
 Today
| |
 Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
|
03-12-2012, 10:42 AM
| #2 |
| elevate not eliminate    Join Date: Dec 2006 Location: middle TN
Posts: 21,001
| Re: Crank case screws Good question but I'm not entirely sure. I would think they should be as well. |
| | |
|
| |
|
03-12-2012, 11:46 AM
| #3 |
| 2nd clone is alive!  Join Date: Jun 2009 Location: West MI
Posts: 6,903
| Re: Crank case screws For future reference use one of these (or similar) on the screws http://www.harborfreight.com/impact-...ase-37530.html I doubt they are hardened or they would not strip so easily. I'm sure they are metric. I might put hardened allen screws in to replace them. |
|
| |
|
| ||||||
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| 87 2pg crank case? | Gas EZGO | |||
| Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
| Yamaha G1 Crank Case oil? | Gas Yamaha | |||
| cc gas crank case pressure? | Gas Club Car | |||
| 1983 crank case oil | Gas EZGO | |||
Linear Mode
