G1 clutch side crankseal ?

DWL · 03-27-2012, 05:48 PM

I have 1984 g1 that has bad crankseal i have read some of the theards about installation but still have some questions. Will the clutch and the pulley be pulled in one piece or do i need to remove snap ring and pull clutch from splind shaft.Also what puller do i need

yamarancher · 03-27-2012, 06:51 PM

You don't have to remove the snap ring, though you can lube it while your at it, and yes you need a puller about $45.00. when you pull it , it all comes off.

03-27-2012, 05:48 PM	#1
DWL Not Yet Wild Join Date: Jul 2011 Posts: 10	G1 clutch side crankseal ? I have 1984 g1 that has bad crankseal i have read some of the theards about installation but still have some questions. Will the clutch and the pulley be pulled in one piece or do i need to remove snap ring and pull clutch from splind shaft.Also what puller do i need
DWL Not Yet Wild Join Date: Jul 2011 Posts: 10

03-27-2012, 06:51 PM	#2
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232	Re: G1 clutch side crankseal ? You don't have to remove the snap ring, though you can lube it while your at it, and yes you need a puller about $45.00. when you pull it , it all comes off.
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232

Similar Threads
Thread	Forum
Putting Clutch side Crank seal in a Yamaha G1	Gas Yamaha
Club Car Clutch Pulley (What Side?	Gas Club Car
Passanger side Brake grabbing more than Driver side	Electric Club Car
right side clutch v twin?	Big Block Talk!
Re: Golf cart .vs. side by side	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum