|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-10-2012, 08:51 AM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 3
|
small tube connected to main jet on a G16?
I purchased a power kit from buggies unlimited. It came with k&n filter spring inner sheave and belt. It comes with no new jet or a drill bit to alter the main jet. I took the main jet out to check it out and see if I dare drill it. when I screwed it out the jet has a small tube hooked to the jet?!?! How can this be drilled out. I havent seen on the forums anyone talk about this. I screwed out the entire center piece then removed the main jet from the entire piece that came out I was expecting a normal looking jet with threader outer section. But my jet has a little tube off the jet? What do I do to make this cart run right? Thanks a lot to any help given!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2012, 01:59 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: small tube connected to main jet on a G16?
#11 is the main jet, I don't see a tube?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-10-2012, 10:15 PM | #3 |
Not Yet Wild
Join Date: Apr 2012
Posts: 3
|
Re: small tube connected to main jet on a G16?
Will that explains how much I know! I took #9 out then the center screws out of that. I was was thinking that was the main jet!! im a putts! I wasnt even in the ballpark!! What exactly was I messing with? I see in the diogram #9 is the big center piece I took out then I took another smaller piece out of that.
|
04-10-2012, 11:17 PM | #4 |
Not Yet Wild
Join Date: Feb 2009
Location: Saskatchewan, Canada
Posts: 65
|
Re: small tube connected to main jet on a G16?
The pieces you took out can get clogged up and cause problems, but if you're drilling something out, better stay away from that! If it's clean, just re-install it. Sorry I can't help with re-jetting or drill size info. Maybe the power kit supplier could provide that info.? Good luck.
BLES |
04-10-2012, 11:36 PM | #5 |
Not Yet Wild
Join Date: Apr 2012
Posts: 3
|
Re: small tube connected to main jet on a G16?
I realize I dont want to drill that part out just wondered what that part of the carb was called
|
04-11-2012, 09:43 AM | #6 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: small tube connected to main jet on a G16?
I believe it is the emulsion or bleed tube that atomizes the fuel at slow venturi air flows.
|
04-11-2012, 01:43 PM | #7 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: small tube connected to main jet on a G16?
9 = Main Nozzle
10 = Main Bleed Pipe |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-11-2012, 07:10 PM | #8 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: small tube connected to main jet on a G16?
I can't figure out what #1 is. Looks like a hanger or cable of some type.
|
|
|
04-11-2012, 07:18 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: small tube connected to main jet on a G16?
|
04-11-2012, 07:23 PM | #10 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: small tube connected to main jet on a G16?
|
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Elcon Charger Indicating Batteries Disconnected When They Are Connected | Electric Club Car | |||
Won't run with muffler connected | Gas EZGO | |||
EZ-GO, will not move unless charger is connected | Electric EZGO | |||
What needs to be connected to charge Precedent | Electric Club Car | |||
leaving charger connected? | Electric EZGO |