Missing Screws for Yamaha G16

Masterhana

Can someone please give me the screw sizes for the following (Want to pick up from box store):

1.) Access Panel Truss Screw

2.) Front screw to hold roof support to frame.

3.) Bolt to hold rear roof support to back seat frame (Goes through to support bars).

4.) Rivets to hold driver rear fender panel.

Thanks
Carla

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Mike Mac

Carla, can't help you except I think the rivits are, 3/16x5/8 long.

number 2, is a stud, (only Yamaha will have this part)

svmoore

Welcome to bgw! I would suggest a variety pack of screws from a local Walmart if a golf cart supplier is not convenient. Rivets will need a rivet gun to install. Where are you located?

Masterhana

Right outside St Louis, MO

snopro1

Access panel screw is actually a plastic rivet similar to the ones holding on the bagwell liner. You could convert it to a screw with a clip/U nut similar to this

http://www.clipsandfasteners.com/1_4...as9848-100.htm

just measure the distance from the edge of the panel to the hole to get the right size. You may have to go to a auto parts store for both the plastic rivet or the clip nut.

The bolts holding the rear top support are either 2 1/2 or 3" long by 5/16. Use a flat washer, one each side, with a nylock nut on each of the four bolts.