|
|||||||
| Notices | ||
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | ||
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
08-05-2008, 04:28 PM
|
#1 |
|
The Overposter!
Join Date: Nov 2007
Location: Dixie
Posts: 1,575
|
Lowering the swingarm on a G2
Ive seen this done before. I need to lower my swing arm on my G2. I have a Gx390 clone in it and it seems to be leaning back a little too much and I would like to level the engine out completely. What is the best way to do this. I saw The New Guy do it with his and it came out really good. I can weld if I have to but would prefer not too because I would have to borrow a welder. Any and all help is appreciated!
Thanks!!  |
|
|
|
|
|
|
08-05-2008, 07:10 PM
|
#2 |
|
Site Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 5,770
|
Re: Lowering the swingarm on a G2
If you look at the first couple of pics you can see the way I did the swing arm drop the first time around. I just made up two bolt on brackets. The way I have it now is much stronger.
Yamaha G9 frame repair |
|
Ron
If you can't run with the BIG DOGS...stay on the porch  Please Visit Our Sponsors TheBadBoyG9 * Frame Mod * New Exhaust Marathon Project |
|
|
|
|
08-05-2008, 09:29 PM
|
#3 |
|
The Overposter!
Join Date: Nov 2007
Location: Dixie
Posts: 1,575
|
Re: Lowering the swingarm on a G2
Thanks!
How hard was this to do? |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| lowering 97 ezgo | Electric EZGO | |||
| Lowering a g2/g9? | Gas Yamaha | |||
| lowering an ez go? | Design Center | |||
Linear Mode
