|
|||||||
| Notices | ||
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | ||
|
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
08-16-2008, 01:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2008
Location: DFW Texas
Posts: 34
|
Would this clutch work in my G2
Salsbury 2090 Primary or drive clutch
Salsbury 400 series Driven or secondary clutch The add states: This system will work on any many applications and has the following specs, Drive clutch is set up to run on any 2-cycle or 4-cycle engine running the standard 1" straight bore keyed PTO or shaft. Clutch diameter is 7 1/4". Clutch is fully tunable with different ramps and springs allowing you to adjust your performance and needs per your application. Driven clutch is set-up to run on any 1" diameter shaft or axle, keyed. Clutch is approximately 10 3/4" in diameter and is also fully adjustable and tunable. Since I need a new clutch, I was wondering if this could be the ticket?? |
|
|
|
|
|
|
08-16-2008, 01:47 PM
|
#2 |
|
Not Yet Wild
Join Date: May 2008
Location: Florida
Posts: 41
|
Re: Would this clutch work in my G2
The G2 has a tapered shaft. I would recommend this one from one of the site sponsers: http://www.cartpartsplus.com/yamaha-...rf-clutch.html
They can also machine you existing driven clutch if you want but it may not be necessary. But if your cart is apart now would be the time to do that. |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Will this work? | Big Block Talk! | |||
| Brakes don't work | Electric EZGO | |||
Linear Mode
