lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-08-2013, 08:42 PM   #1
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default secondary clutch G16 ..spring hole question

I have a G16 and want a little more torque than stock..secondary spring setting stock calls for B/3 on spring.. can I set it to more preload and get a little more torque with out using a aftermarket spring..I read thats not a good idea to install .. to much preload ...so what holes should I use to get more torque than stock anyone have experience doing this..if yes what hole combo should I use
Tawas is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-08-2013, 10:07 PM   #2
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default Re: secondary clutch G16 ..spring hole question

can anyone help me with this question?????and will removing the plastic washer help with anything ???
Tawas is offline   Reply With Quote
Unread 07-08-2013, 10:15 PM   #3
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,769
Default Re: secondary clutch G16 ..spring hole question

tons of info on this subject right on this first page. all you gotta do is read.
Mike Mac is offline   Reply With Quote
Unread 07-08-2013, 10:42 PM   #4
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default Re: secondary clutch G16 ..spring hole question

well I did read some but do not understand ..when changing my clutch spring do I keep it at B and change numbers or do I change the numbers too ..example stock is b/3 should I stay in b then go up to b/4 and so on..or do I change it to c/4 ..thats what I dont understand ??
Tawas is offline   Reply With Quote
Unread 07-08-2013, 10:51 PM   #5
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,769
Default Re: secondary clutch G16 ..spring hole question

I'd do the concierge/umax spring. Its cheap and getting very popular lately. Good for stock or a hotrod!!

Keep reading, you will learn tons of modifications!!
Mike Mac is offline   Reply With Quote
Unread 07-08-2013, 11:07 PM   #6
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default Re: secondary clutch G16 ..spring hole question

please send link for a unimax spring to buy please yamaha G16
Tawas is offline   Reply With Quote
Unread 07-08-2013, 11:12 PM   #7
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,769
Default Re: secondary clutch G16 ..spring hole question

Cartpartplus, vender on here, or smallblock450sl. Or Yamaha dealer in town.
Mike Mac is offline   Reply With Quote
Unread 07-09-2013, 10:05 AM   #8
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default Re: secondary clutch G16 ..spring hole question

still wondering if I could get some GOOD advise on my clutch question ..about just getting a little more preload on my clutch stock spring... stock its B/3 will B/4 give me more than stock or do I change it to C/4 ..is the clutch need to stay in B hole for just a bit more than stock..
Tawas is offline   Reply With Quote
Unread 07-09-2013, 01:47 PM   #9
Gone Wild
 
DOOmsman's Avatar
Yamaha
 
Join Date: Jul 2008
Location: Reddick IL
Posts: 10,985
Default Re: secondary clutch G16 ..spring hole question

If you think about it and check the stock position you will see that hole 4 will increase tension.
DOOmsman is offline   Reply With Quote
Unread 07-09-2013, 06:12 PM   #10
Not Yet Wild
Yamaha
 
Join Date: Jun 2013
Location: Michigan
Posts: 44
Default Re: secondary clutch G16 ..spring hole question

thank you very much ..thats all I needed to help me ..well appreciated
Tawas is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
G2 Driven Clutch Factory Spring hole setup Gas Yamaha
Secondary clutch spring Gas Yamaha
Secondary clutch puller - bolt hole spacing Gas Yamaha
secondary clutch spring Gas Yamaha
91 g2 secondary clutch spring Gas Yamaha


All times are GMT -5. The time now is 07:07 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.