Problem with 2007 yamaha drive clutch

jwalsh965 · 07-21-2013, 08:29 AM

I have removed my clutch off of my 2007 Yamaha drive YDRA, my problem now is how to get it apart to get at the weights to check the inside because I have a ticking noise when up shifting and downshifting. Just purchased this cart from a dealer and they just installed this clutch new. Because of the distance they asked me to take it apart to figure out what is wrong. Here is a few pics, any help would be great to get it apart. THANKS

smallblock450sl · 07-21-2013, 10:38 AM

There is a "special" tool that has "fingers" that fit into the slots of (for lack of better word) the "spider". Then you unscrew it, counter clockwise. I will tell you from experiance....It is very tight!! Almost broke a breaker bar and my arm on one or 2

Were the bolts all tight on the starter belt pulley? Remember one that made a clicking noise one bolt was sheared off and the other 3 were loose. Erlandson has a kit for the bad Teem primary clutch that includes new weights and a "return" spring. Good Luck.

jwalsh965 · 08-05-2013, 01:59 PM

Thanks smallblock i will try to use a bar like you described crossing fingers

07-21-2013, 10:38 AM	#2
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,875	Re: Problem with 2007 yamaha drive clutch There is a "special" tool that has "fingers" that fit into the slots of (for lack of better word) the "spider". Then you unscrew it, counter clockwise. I will tell you from experiance....It is very tight!! Almost broke a breaker bar and my arm on one or 2 Were the bolts all tight on the starter belt pulley? Remember one that made a clicking noise one bolt was sheared off and the other 3 were loose. Erlandson has a kit for the bad Teem primary clutch that includes new weights and a "return" spring. Good Luck.

08-05-2013, 01:59 PM	#3
jwalsh965 Getting Wild Join Date: Jan 2013 Location: st. john's nl canada Posts: 139	Re: Problem with 2007 yamaha drive clutch Thanks smallblock i will try to use a bar like you described crossing fingers

Similar Threads
Thread	Forum
Yamaha G1-G22 Drive Clutch Puller	Garage and Workshop
WTB drive clutch weights for Yamaha G2	Golf Carts and Parts
drive clutch problem?	Gas Club Car
Yamaha Drive Clutch Puller	Gas Yamaha
Drive clutch problem	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum