|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-21-2008, 09:39 PM | #1 |
Not Yet Wild
Join Date: Sep 2008
Location: Maricopa, Az
Posts: 23
|
What to expect out of G16
Hello all,
This is my first post on this site. I am looking to get some questions answered. If anyone could help me out that would be great. 1. I have a white rear clutch spring is that upgraded or is that stock? 2. I am getting about 23 mph out of stock motor is that about it? 3. How can i tell how many HP my motor is? 4. What is the standard ring size on a stock motor? Thank you all for you help with this... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2008, 09:50 PM | #2 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: What to expect out of G16
Nice looking cart.
1. Stock spring is black. 2. thats good u should be able to get more by bypassing the governor. Stock set cart 12-14 mph 3. I think 10 hp 4. no idea |
09-21-2008, 09:59 PM | #3 |
Not Yet Wild
Join Date: Sep 2008
Location: Maricopa, Az
Posts: 23
|
Re: What to expect out of G16
|
09-21-2008, 10:04 PM | #4 |
Not Yet Wild
Join Date: Sep 2008
Location: Maricopa, Az
Posts: 23
|
Re: What to expect out of G16
I am trying to figure out a problem. I just bought that cart and it runs great until i climb the paved road to my house then it dies down to about 5-8 mph... I was hoping that i could put the white power spring in the clutch to help me out but it already has one in it. I do know it needs new rings as it is smoking a little. I would like to bypass the governer but my wife has a lead foot and would probably blow it up i am sure.Any other suggestions or does that motor just have no torque? That is my dilemma. Here is another pic.
|
09-21-2008, 10:12 PM | #5 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 371
|
Re: What to expect out of G16
do a compression check on the motor, that will tell u if it needs a rebuild.....the clutch spring is most likely already upgraded...put a tach on the cart and monitor the RPM's and bypass the gov....
|
09-22-2008, 12:26 PM | #6 |
Not Yet Wild
Join Date: Sep 2008
Location: Maricopa, Az
Posts: 23
|
Re: What to expect out of G16
Would the lack of compression give me significant power loss under load of going up hill?
|
09-22-2008, 09:10 PM | #7 |
Not Yet Wild
Join Date: Sep 2008
Location: Maricopa, Az
Posts: 23
|
Re: What to expect out of G16
Bump
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
How much voltage can I expect ? | Electric Club Car |