lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-09-2014, 12:16 PM   #1
jonboynsherry
Not Yet Wild
 
Join Date: Mar 2014
Posts: 5
Default g14 clutch bolt removal. how??

Having trouble removing the clutch bolt. Please help??? The flywheel bolt came off easily.
jonboynsherry is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-09-2014, 01:07 PM   #2
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: g14 clutch bolt removal. how??

7/8" socket and air impact is easy way. Its not reverse thread, or anything tricky like that.
cgtech is offline   Reply With Quote
Old 03-09-2014, 01:19 PM   #3
jonboynsherry
Not Yet Wild
 
Join Date: Mar 2014
Posts: 5
Default Re: g14 clutch bolt removal. how??

Quote:
Originally Posted by jonboynsherry View Post
Having trouble removing the clutch bolt. Please help??? The flywheel bolt came off easily.
Quote:
Originally Posted by cgtech View Post
7/8" socket and air impact is easy way. Its not reverse thread, or anything tricky like that.
I tried several times with a 20v cordless impact, just not happening, I used a 22mm on it . I'll try right now on the 7\8".. Back in a few
jonboynsherry is offline   Reply With Quote
Old 03-09-2014, 01:30 PM   #4
jonboynsherry
Not Yet Wild
 
Join Date: Mar 2014
Posts: 5
Angry Re: g14 clutch bolt removal. how??

No luck with the 7/8", gonna try to borrow a air impact if I can find a 1" reducer. To tackle it with.
jonboynsherry is offline   Reply With Quote
Old 03-09-2014, 01:35 PM   #5
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: g14 clutch bolt removal. how??

Do you have a breaker bar?
1989Marathon is offline   Reply With Quote
Old 03-09-2014, 01:47 PM   #6
jonboynsherry
Not Yet Wild
 
Join Date: Mar 2014
Posts: 5
Default Re: g14 clutch bolt removal. how??

I've tried the breaker bar, motor hard to keep still, the motor is completely removed from the cart.
jonboynsherry is offline   Reply With Quote
Old 03-09-2014, 01:50 PM   #7
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: g14 clutch bolt removal. how??

You need another pair of hands to use a breaker bar.
The bolt will either come out, or it will break off. Not alot you can do at this point.
1989Marathon is offline   Reply With Quote
Old 03-09-2014, 03:50 PM   #8
jonboynsherry
Not Yet Wild
 
Join Date: Mar 2014
Posts: 5
Default Re: g14 clutch bolt removal. how??

Quote:
Originally Posted by 1989Marathon View Post
You need another pair of hands to use a breaker bar.
The bolt will either come out, or it will break off. Not alot you can do at this point.
1989 marathon.. How can I keep the crank still, from turning seems to be an issue even with 2sets of hands
jonboynsherry is offline   Reply With Quote
Old 03-09-2014, 04:40 PM   #9
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: g14 clutch bolt removal. how??

Quote:
Originally Posted by jonboynsherry View Post
1989 marathon.. How can I keep the crank still, from turning seems to be an issue even with 2sets of hands
If the clutch is slipping in your hands, try using rubber dishwashing gloves. You wouldn't believe how much more grip they will give you.
1989Marathon is offline   Reply With Quote
Old 03-09-2014, 05:41 PM   #10
pachanga90
I Refuse To Get Stuck!!!
 
pachanga90's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
Default Re: g14 clutch bolt removal. how??

Just for grins,take 2 hammers,put one against the head of the bolt,and give it a good sharp whack with the other.Then try the impact again.Alot of times this makes a stubborn bolt loosen easily.If someone used red Loctite(and I really hope not the Green) on it,that may be the issue too,since it needs heat to break the bond.A nylon strap-type filter wrench works good too.A trick we used on sleds was to feed nylon rope into the cylinder,and it would lock the piston when you tried to turn it over.Just gotta be careful that it doesn't fall into the port as you feed it in(on a 4-stroke you gotta make sure its' on compression,so the valves are closed).Hope this helps.
pachanga90 is offline   Reply With Quote
Reply

Tags
clutch bolt, g14, jn5-300
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
how do i get the clutch bolt out Gas Yamaha
A Rocker Arm Bolt Removal Gas Yamaha
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch Gas Club Car
Clutch Removal Bolt Tool - KF82 Gas Club Car
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car


All times are GMT -5. The time now is 07:27 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.