Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Gas Yamaha (http://www.buggiesgonewild.com/gas-yamaha/)
-   -   g14 specs (http://www.buggiesgonewild.com/gas-yamaha/91795-g14-specs.html)

bogeyman 03-25-2014 12:39 PM

g14 specs
 
hello, just wondering if the cylinder and rings specs are the same for a g 9 and g14. rebuilding a g14 and found that g14 takes a different ring set than the g9 but all other parts are the same. thanks for now.

smallblock450sl 03-25-2014 06:41 PM

Re: g14 specs
 
Quote:

Originally Posted by bogeyman (Post 1004163)
hello, just wondering if the cylinder and rings specs are the same for a g 9 and g14. rebuilding a g14 and found that g14 takes a different ring set than the g9 but all other parts are the same. thanks for now.

The G-14 is basicly a 1 year car. It has a JN5 engine block, with a larger piston.

bogeyman 03-25-2014 07:24 PM

Re: g14 specs
 
the piston must be longer in length, not diameter because they both measure 73 mm, which led me to wonder why there were different ring sets for the g9 and g 14

smallblock450sl 03-25-2014 07:48 PM

Re: g14 specs
 
Not trying to be a smart alick. J38-displacement-285cm3/bore-stroke-73 x 68m. Jn5-dispacement-300 cm3/bore-stroke-75 x 68m. Hope that helps alittle.

bogeyman 03-25-2014 08:13 PM

Re: g14 specs
 
ok. maybe i dont have a g14/ cant locate model number. looked every where, the cylinder measures 73 dia, the head gasket is exactly the same as my g9 the only part that is different is the air filter and the way the air filter is run, comes out behind drivers leg. is there any other way i can tell what i have for a cart.

smallblock450sl 03-25-2014 08:18 PM

Re: g14 specs
 
Can you post some pictures of the engine compartment?

bogeyman 03-25-2014 08:59 PM

Re: g14 specs
 
4 Attachment(s)
Attachment 100838

Attachment 100839

Attachment 100840

Attachment 100841

Hope these help

smallblock450sl 03-26-2014 09:53 AM

Re: g14 specs
 
That is a G14 car. Maybe some put a J38 long block into it? The block (behaind the cylinder) would be stamped (J38). It would work fine as long as you use the G14 ignition pickup, the flywheel and coil from the G14.

bogeyman 03-26-2014 10:58 AM

Re: g14 specs
 
alright, thanks for your help, much appreciated.


All times are GMT -5. The time now is 06:23 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.