|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-14-2014, 07:18 PM | #1 |
Gone Wild
Join Date: Mar 2014
Location: S.W. Florida
Posts: 302
|
g16 input shaft
I got my plowmans clutch kit & jets on my cart & it droped 7 mph but that isn't the problem I have I noticed the input shaft has slop in it & also some noise coming from back their bearing noise I assume its the input shaft bearing.. is their any videos or instructions with pics on how to install the input shaft repair kit I see sold everywhere. if I need a whole new rear end where is the best place to buy one? yes I know they are $2k... stock clutch was 27mph on flat land 11mph up hill.. plowmans is 20mph flat land 13 up hill. not real pleased with results. it does stare better with the new jets.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2014, 08:24 PM | #2 | |
Gone Wild
Join Date: Aug 2012
Location: Twin Falls Idaho
Posts: 540
|
Re: g16 input shaft
Quote:
If you need a rear end then let me know. I have thre i was going to put on eBay |
|
05-14-2014, 08:40 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: g16 input shaft
Tom @ www.cartpartsplus.com (site sponsor) has the best price on a Dana input shaft kit. DaveinVA has a right up and pictures of his broken input shaft replacement. Sorry for the bad memories Dave
|
05-15-2014, 10:31 AM | #4 | |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: g16 input shaft
Quote:
http://www.buggiesgonewild.com/gas-y...placement.html |
|
05-16-2014, 11:47 AM | #5 |
Gone Wild
Join Date: Mar 2014
Location: S.W. Florida
Posts: 302
|
Re: g16 input shaft
thanks for the pics dave. was their a lot of tiny parts to deal with doing the input shaft replacement? im only 1 notch above a retard so im not sure how much I have to remove to replace the shaft & outer bearing
|
05-16-2014, 09:14 PM | #6 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
No real small parts. Shaft, bearing, seal and several spacers.
Sent from my SCH-I545 using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Input shaft | Gas Yamaha | |||
Input shaft | Electric EZGO | |||
G16 input shaft | Gas Yamaha | |||
G9 Input Shaft? | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts |