lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-04-2014, 10:25 PM   #1
Not Yet Wild
 
Join Date: May 2014
Posts: 13
Default 99 G16 and large purchase from CPP!

Well, I bought a cart and I knew it had clutch issues. The motor looked brand new, so I was hoping the clutch exploded and someone just parked it for a few years. I had starter problems and it's getting rebuilt right now. What I didn't know when I bought the cart was that the REASON the clutch exploded is because the input shaft broke off and allowed the sheave to hit the clutch and also ruin it (I'm assuming...)

So I told myself that I would wait until the starter was fixed, get it running and then do a compression check, but I lost control................Here's what I have coming:

Input Shaft Repair Kit
Yamaha Performance Clutch
Power Package
Fixed Sheave
New Helix
Clutch Puller
Starter Belt
Fuel Line Kit
And a long list of other little things

If the compression checks out good and she runs good, I see a long travel lift, tires and wheels, and a lime green paint job! If not, then I see a clone or a big block, I'm not sure what I'm hoping for at this point!

I've taken lots of pictures and plan to take more during each step of the build, I just need to figure out how to post them!

Jonathan
born2buggie is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-05-2014, 08:32 AM   #2
Gone Wild
 
duramax's Avatar
 
Join Date: Mar 2014
Location: S.W. Florida
Posts: 296
Default Re: 99 G16 and large purchase from CPP!

I hope you didn't jump the gun? if the input shaft broke off did it mess up anything in the rearend?? that's $1800 by its self. might ck that out before you install all your parts & cant return them
duramax is offline   Reply With Quote
Unread 06-05-2014, 08:59 AM   #3
I Refuse To Get Stuck!!!
 
pachanga90's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Hamlin,NY
Posts: 5,384
Default Re: 99 G16 and large purchase from CPP!

$1800!!I hope you shop around a little more.Ive bought those rears as cheap as $50,the most ive paid was under $300.
pachanga90 is offline   Reply With Quote
Unread 06-05-2014, 01:33 PM   #4
Not Yet Wild
 
Join Date: May 2014
Posts: 13
Default Re: 99 G16 and large purchase from CPP!

Hopefully nothing else is wrong in the rear end, but I do have access to one for a very cheap price if it is. All those parts were either broken or missing so either way I would have had to buy them. I just hope they get here fast, I'm getting bored!
born2buggie is offline   Reply With Quote
Unread 06-05-2014, 05:16 PM   #5
Gone Wild
 
duramax's Avatar
 
Join Date: Mar 2014
Location: S.W. Florida
Posts: 296
Default Re: 99 G16 and large purchase from CPP!

Quote:
Originally Posted by pachanga90 View Post
$1800!!I hope you shop around a little more.Ive bought those rears as cheap as $50,the most ive paid was under $300.
the whole entire rear axle assembly for $50?
duramax is offline   Reply With Quote
Unread 06-05-2014, 06:32 PM   #6
kamsahamnida
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 5,965
Default Re: 99 G16 and large purchase from CPP!

Quote:
Originally Posted by duramax View Post
the whole entire rear axle assembly for $50?
Not new. Used these rear end/trans axles can be had for cheap if you are patient and look around. When you see one, snatch it up! That's my motto... I bought an entire cart, minus engine, for $400, and it's complete (not disassembled) and rust free. They can be found.
slonomo is offline   Reply With Quote
Unread 06-05-2014, 07:01 PM   #7
Gone Wild
 
duramax's Avatar
 
Join Date: Mar 2014
Location: S.W. Florida
Posts: 296
Default Re: 99 G16 and large purchase from CPP!

this sounds like it could be a cheeper way than a new input shaft. aftermarket shafts are $300 correct? & about $200 labor to put in
duramax is offline   Reply With Quote
Unread 06-05-2014, 10:13 PM   #8
Not Yet Wild
 
Join Date: May 2014
Posts: 13
Default Re: 99 G16 and large purchase from CPP!

I didn't even think about it, but I could have probably bought that axle for a little more than the input shaft kit! Oh well, I was actually wanting to do it myself, but this is something to think about for sure in the future.

Jonathan
born2buggie is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
99 48v CCDS Large Arc Electric Club Car
Large Cart Videos
Large Head Rivets Gas EZGO
How large can I go before having to lift it? Electric Club Car


All times are GMT -5. The time now is 08:20 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.