|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-29-2014, 10:27 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Location: Birmingham, AL
Posts: 35
|
Welds on front suspension
The weld on one side of the front tap that is welded to the round tube has broken loose on mine. It is above the top bolts in this photo, which is not my cart, just to show.
I have searched and not seen anyone have problems here. Looking at the way it is welded, it does not look very strong. Any ways to fix this better since I'm going to have get it welded back on? Anything need to make sure in fixing this? Help is needed. Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2014, 07:05 PM
|
#2 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Welds on front suspension
That front end got hit really hard if that weld broke!
|
|
|
|
|
07-29-2014, 08:03 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Welds on front suspension
ROLL TIDE ROLL!!!!!!!!! Coker is gonna take us all the way!!!!
|
|
|
|
|
07-29-2014, 08:30 PM
|
#4 |
|
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Welds on front suspension
Thats what I hate with the Econo-Lifts,They add alot of stress,without extra support.The proper repair would be to remove the lift-kit,install the control-arms in stock location(or atleast try to,you may have to pull it some first),straighten and repair the break,then you can reinstall the lift-kit.When prepped and welded properly,it should be better than new.Hope this helps.
 |
|
|
|
|
07-31-2014, 12:27 AM
|
#5 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Welds on front suspension
That front suspension looks pretty messed up! Gotta wonder what that radiator is doing in there?
 |
|
|
|
|
07-31-2014, 08:38 AM
|
#6 |
|
Not Yet Wild
Join Date: May 2011
Location: Birmingham, AL
Posts: 35
|
Re: Welds on front suspension
Thanks for the replies so for. The pic is not my cart. I will post a pic of it tonight.
|
|
|
|
|
07-31-2014, 09:09 AM
|
#7 |
|
Getting Wild
Join Date: Mar 2013
Location: Tallassee,Alabama
Posts: 141
|
Re: Welds on front suspension
Mine is basically the same setup with a 4" lift . I would just weld it back up if the round bar is not cracked or split. Or you could add some flat stock on top and weld that too for added support . Mine takes a lot of twisting in the woods and has held up fine so far.
Oh Yea.... ROLL TIDE ROLL !!!!! |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| g1 front suspension | Gas Yamaha | |||
| Front End Suspension | Gas Yamaha | |||
| ATV front suspension | Golf Carts and Parts | |||
Linear Mode
