Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Golf Cart Parts (http://www.buggiesgonewild.com/golf-cart-parts/)
-   -   Yamaha Golf Cart Speed Spring (http://www.buggiesgonewild.com/golf-cart-parts/1700-yamaha-golf-cart-speed-spring.html)

NO NO NO E-Z-GO! 09-16-2007 06:48 PM

Yamaha Golf Cart Speed Spring
 
Check this out! :thumbup:

Yamaha Speed Spring

:shock: 8) :shock: 8) :shock: 8) :shock:

roady89 09-16-2007 07:13 PM

Re: Yamaha Speed Spring
 
I have one of those. I should get it in this week and I'll post the results.

spriddle 09-17-2007 09:04 AM

Re: Yamaha Speed Spring
 
I really don't see what the difference is going to be in using this vs. simply tightening the 10 mm nut on the stock governor.

NO NO NO E-Z-GO! 09-17-2007 03:11 PM

Re: Yamaha Speed Spring
 
That spring is tighter than the stock spring. I'm assuming that in this springs lowest setting it's as tight as the stock one is tightened all the way down. :wink:

Either way, I'm not going to argue with 29mph out of a ***STOCK*** G16. :shock: 8)

spriddle 09-17-2007 03:18 PM

Re: Yamaha Speed Spring
 
Completely bypass it and go faster. :thumbup:

NO NO NO E-Z-GO! 09-17-2007 03:21 PM

Re: Yamaha Speed Spring
 
I bypassed a governor on a 91 G9, added the K&N like Gary's and the jets too, and it is just really doggish when you get on it. It just sounds like it has the intake, absolutely no performance advantage. :? I have replaced the carb joint and adjusted the fuel/air mix to no end and it just will not run as strong as it should. Or maybe jets and K&N intakes are just a hoax? :?: :|

It will go fast but just takes a long time to get there. Then as soon as you're moving a satisfactory speed the limiter shuts it down.

spriddle 09-17-2007 03:28 PM

Re: Yamaha Speed Spring
 
Bring me all the stock stuff, spring/spacer kit, and let me work on it for a few hours. :thumbup:

TheNewGuy 09-17-2007 06:13 PM

Re: Yamaha Speed Spring
 
Quote:

Originally Posted by NO NO NO E-Z-GO! (Post 27456)
I bypassed a governor on a 91 G9, added the K&N like Gary's and the jets too, and it is just really doggish when you get on it. It just sounds like it has the intake, absolutely no performance advantage. :? I have replaced the carb joint and adjusted the fuel/air mix to no end and it just will not run as strong as it should. Or maybe jets and K&N intakes are just a hoax? :?: :|

It will go fast but just takes a long time to get there. Then as soon as you're moving a satisfactory speed the limiter shuts it down.

No hoax, I got 30-31 mph out of my stock 285cc with 22" tires. ;-)

NO NO NO E-Z-GO! 09-17-2007 06:40 PM

Re: Yamaha Speed Spring
 
This cart will probably run in the upper 20s, however, it's a while getting there. It has no more power than it did before and it's only faster becase I bypassed the governor.

blakehenry00 09-17-2007 07:22 PM

Re: Yamaha Speed Spring
 
Just hit 37.1 in my G16, i believe every word.


All times are GMT -5. The time now is 07:15 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.