2010 Drag Cart

GarageBuilt · 03-13-2010, 08:30 AM

Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work. The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it.

ENJOY...

Oh yah. I forgot to say (Let's Race.) Also for you guys that keep up with the white zombie. He runs this same motor.

redriderno22 · 03-13-2010, 09:04 AM

what axle are you going to use GB?

that impluse will wrap a golf cart diff into a knot

GarageBuilt · 03-13-2010, 09:35 AM

[QUOTE=GarageBuilt;377703]Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work.

The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it.

ENJOY...

Hope this helps. Good morning Red 22.. Now wake up.

redriderno22 · 03-13-2010, 09:37 AM

Sorry GB i cant read..

redriderno22 · 03-13-2010, 09:38 AM

coffee where's my coffee!

wilster734 · 03-13-2010, 09:42 AM

gonna need a really big wheely bar. i'm watchin

GarageBuilt · 03-13-2010, 10:01 AM

Quote:

Originally Posted by wilster734

gonna need a really big wheely bar. i'm watchin

Hey wilster. When it is ready to test, you come out to the airport out side of tomball. They let me test my carts there.

redriderno22 · 03-13-2010, 10:04 AM

cool.. put some wings on that thing

GarageBuilt · 03-13-2010, 10:09 AM

Quote:

Originally Posted by redriderno22

Sorry GB i cant read..

Sure you can red. I am sure that you just sneezed & farted at the same time & you just missed that part.

essness · 03-13-2010, 10:12 AM

Quote:

Originally Posted by GarageBuilt

Hey wilster. When it is ready to test, you come out to the airport out side of tomball. They let me test my carts there.

I stay out by Tomball when I'm working Houston

David Wayne Hooks?

03-13-2010, 08:30 AM	#1
GarageBuilt Gone Wild Join Date: Mar 2009 Location: At the race track(Texas) Posts: 946	2010 Drag Cart Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work. The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it. ENJOY... Oh yah. I forgot to say (Let's Race.) Also for you guys that keep up with the white zombie. He runs this same motor.

03-13-2010, 09:04 AM	#2
redriderno22 let it SNOW Join Date: Apr 2009 Location: Marengo OHIO Posts: 871	Re: 2010 Drag Cart what axle are you going to use GB? that impluse will wrap a golf cart diff into a knot

03-13-2010, 09:35 AM	#3
GarageBuilt Gone Wild Join Date: Mar 2009 Location: At the race track(Texas) Posts: 946	Re: 2010 Drag Cart [QUOTE=GarageBuilt;377703]Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work. The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it. ENJOY... Hope this helps. Good morning Red 22.. Now wake up.

03-13-2010, 09:37 AM	#4
redriderno22 let it SNOW Join Date: Apr 2009 Location: Marengo OHIO Posts: 871	Re: 2010 Drag Cart Sorry GB i cant read..

03-13-2010, 09:38 AM	#5
redriderno22 let it SNOW Join Date: Apr 2009 Location: Marengo OHIO Posts: 871	Re: 2010 Drag Cart coffee where's my coffee!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-13-2010, 09:42 AM	#6
wilster734 IDK&YDE Join Date: Jan 2010 Location: TEXAS Posts: 774	Re: 2010 Drag Cart gonna need a really big wheely bar. i'm watchin

03-13-2010, 10:04 AM	#8
redriderno22 let it SNOW Join Date: Apr 2009 Location: Marengo OHIO Posts: 871	Re: 2010 Drag Cart cool.. put some wings on that thing

Similar Threads
Thread	Forum
Harley drag cart?	Golf Cart Racing
Steering Wheel for 2010 Star Cart	Star and Fairplay
Cart Drag Racing 101	Golf Cart Racing
Drag Cart Vendor's	Golf Cart Racing