|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
06-23-2015, 11:02 PM | #1 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
8HP Briggs Industrial and G1 Drive clutch!
I have a complete and running 8HP Briggs Industrial engine I had in my lifted G1 cart. I had 22-11-10 tires on it and on level ground it would run between 25-28 mph.
The governor has been unhooked and I installed a vac fuel pump on the engine. It worked very good. The engine does come with a drive clutch from a G1 mounted on it using a taper adapter I made myself. This engine worked good for me and I actually made several trips in the cart to a friends about 8 miles away (Each direction) I'd like $75 for the engine and clutch and although I'd like it to be local pickup would be willing to ship on your dime, but you'd need to arrange the shipping thru UPS as I don't have a store close to me. I also still have lots of parts from a G1 and a lot of the electrical parts from a G2 including starter/generator for both. I also have the complete engine from the G2. It was running but smoking when I pulled it. Need a part, ask, I may have it. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-24-2015, 09:16 AM | #2 |
Not Yet Wild
Join Date: Apr 2011
Location: Wisconsin
Posts: 13
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
I am looking for the Jet Sensor for a G1 oil pump do you know where i can get one
|
06-24-2015, 01:33 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
Not sure what that part is or where it is....... I do have a complete engine and most of the cart. I'll look into it.
|
06-24-2015, 02:53 PM | #4 |
Not Yet Wild
Join Date: Apr 2011
Location: Wisconsin
Posts: 13
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
It connects to the rubber hose going to the muffler i need the piece that goes into the muffler
|
06-24-2015, 04:01 PM | #5 |
Not Yet Wild
Join Date: Apr 2015
Location: Lake Pomme de terre
Posts: 6
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
Smokindawg,
What part of Missouri are you in? I'm interested in that engine. Thanks, Monty |
06-24-2015, 09:12 PM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
Monty, I'm 35 miles south of Rolla.
|
06-24-2015, 09:54 PM | #7 |
Not Yet Wild
Join Date: Apr 2015
Location: Lake Pomme de terre
Posts: 6
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
That's not too far. Would tomorrow late afternoon or evening work for you?
Also might be interested in a starter generator if it would work in a ezgo. Leaving for kc Friday morning and not returning till Tuesday afternoon. Monty |
06-25-2015, 07:43 PM | #8 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: 8HP Briggs Industrial and G1 Drive clutch!
Engine is sold........... Thanks Monty!
Melito........ PM incoming! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Diff between 'industrial' and normal clutch? | Gas Club Car | |||
16hp briggs no drive | Big Block Talk! | |||
Industrial Cushman Stock chaser will not drive. | Electric EZGO | |||
High Altitude Drive Clutch and Drive Belt | Gas EZGO | |||
what clutch for 18hp briggs | Big Block Talk! |