|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
03-15-2018, 07:23 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
CC DS rolling chassis 28” and 3 link/LT
Thinking about selling my project now that it is rolling. I started with a 94 DS that had a bad motor no batteries broken resistor and a v glide. I stripped it to the frame installed a Jake’s LT up front built a custom 3 link rear suspension with RADFLO nitrogen 8” travel air shocks rear disc brakes aluminum wheels and 28” tires. I modified the Jake’s LT with high misalignment heim joints to get more down travel and built custom steering links with clevises and heims as well. The frame was cut and rebuilt with heavy aluminum tube to make room for six T1275s but I never purchased them. Ran out of money to finish. I was working with EMP to spec a custom motor and it should run 40mph and have plenty of torque to turn the tires at 72v. I would like to see someone finish it up and enjoy it. Entertaining offers.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-15-2018, 07:30 PM | #2 | |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Quote:
Sent from my iPhone using Tapatalk |
|
03-15-2018, 07:31 PM | #3 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
|
03-15-2018, 07:32 PM | #4 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Sent from my iPhone using Tapatalk |
03-16-2018, 11:38 AM | #5 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: CC DS rolling chassis 28” and 3 link/LT
Wow! Very nice fab work. The welds look really good.
Where are you located? |
03-16-2018, 12:07 PM | #6 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Clearwater area FL
Thanks I did the design and fab work but hired a mobile welder to do the actual welding. I don’t have the equipment nor skill to do nice structurally sound welds. Sent from my iPhone using Tapatalk |
03-23-2018, 03:29 PM | #7 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Bump
$3500 obo Willing to ship at buyers cost Sent from my iPhone using Tapatalk |
03-30-2018, 08:06 AM | #8 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Taking offers, need it gone.
Sent from my iPhone using Tapatalk |
04-08-2018, 02:05 PM | #9 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Considering parting out since no offers
Jake’s LT modded with better joints and heim joints steering for more travel Tires and wheels Wheel spacers Rear disc brake kit Remaining chassis, body and rear axle with 3 link set up RADFLO nitrogen charged 8” travel air shocks |
05-12-2018, 09:04 AM | #10 |
Not Yet Wild
Join Date: Aug 2016
Location: Dunedin, FL
Posts: 52
|
Re: CC DS rolling chassis 28” and 3 link/LT
Ok getting desperate to sell down to $2000 firm
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
G16 Rolling Chassis--What's it worth? | Gas Yamaha | |||
ISO: Rolling chassis for BB swap | Golf Carts and Parts | |||
WTB ez go frame or rolling chassis | Golf Carts and Parts | |||
Rolling Chassis | Electric EZGO | |||
2 rolling chassis | Golf Carts and Parts |