Front Body For 2000 EZgo txt

JRL · 03-09-2019, 03:35 PM

As the title says, I need an undamaged front body for my txt. Don't want headlight cutouts and paint doesn't matter. I gotta paint it either way.
My front ran under something and I cannot get it back flat enough to repair. Plastic is stretched.
Like to locate something around the Charlotte NC area.
Would consider a cutout of the front body center that includes the formed lines. I could make a "hood"..I think...at least that could be easily shipped?
Thanks.

millersouth · 03-10-2019, 10:53 PM

Got plenty of them if you are ever near the Myrtle Beach area. 25.00 fronts and 25.00 back

Sent from my SM-G930T using Tapatalk

jclark138 · 03-10-2019, 11:54 PM

Dang, that’s about what, a three hour drive?
I’m jealous- our grocery trip is an hour and half each way!

JRL · 03-11-2019, 11:21 PM

Appreciate your response. I don't get to the beach too often. I found this cowl on Amazon for $197 shipped. Not sure what I paid for but looks promising. They listed "2 remaining" and when I pulled it up to show spousey what I bought her, the price for the remaining cowl was $463...I dunno if maybe they had a front without a rear or what. My rear body is in good condition...has been pretty good bit modified, so only wanted a front. I like the curious paint work. We shall see.
Thanks again!

kgsc · 03-12-2019, 06:30 PM

You should be able to find one at a local cart shop but $25 is a good price. You may also want to look at the other cowls available. Yours, the ST, the 4 series and the newer body styles will all fit.

JRL · 03-12-2019, 10:27 PM

Didn't know about the interchangeability. Interesting. As of the moment, I bought a new painted front from AMZ for less than $200 bucks. Anxious to see it. Be here tomorrow. Already in Charlotte. That's the pic above.
I know zero about golf carts. I know about motorcycles. I've essentially set a Ezgo txt onto a modified Kaw 750 Brute Force engine mounted in a Kaw Prairie 700 farm. Wanted the solid rear axle for stability. I plan to slip this thing into music festivals. They'll allow golf carts, gas or electric, but no ATV or UTV. It looks like a lifted TxT....really lifted.
Thanks for the info! I may yet need a front?

JRL · 03-12-2019, 10:37 PM

Couple pics of what I'm doing.

JRL · 03-13-2019, 06:03 PM

For S&Gs, this is my $197 shipped front cowl. Very pleased.

kgsc · 03-13-2019, 08:59 PM

Sweet!!

raydhd · 03-13-2019, 09:20 PM

Really Nice

03-09-2019, 03:35 PM	#1
JRL Gone Wild Join Date: Oct 2010 Posts: 527	Front Body For 2000 EZgo txt As the title says, I need an undamaged front body for my txt. Don't want headlight cutouts and paint doesn't matter. I gotta paint it either way. My front ran under something and I cannot get it back flat enough to repair. Plastic is stretched. Like to locate something around the Charlotte NC area. Would consider a cutout of the front body center that includes the formed lines. I could make a "hood"..I think...at least that could be easily shipped? Thanks.
JRL Gone Wild Join Date: Oct 2010 Posts: 527

03-10-2019, 10:53 PM	#2
millersouth Gone Wild Join Date: Feb 2015 Location: Myrtle Beach S.C Posts: 151	Re: Front Body For 2000 EZgo txt Got plenty of them if you are ever near the Myrtle Beach area. 25.00 fronts and 25.00 back Sent from my SM-G930T using Tapatalk

03-10-2019, 11:54 PM	#3
jclark138 Runs with scissors- Join Date: Dec 2010 Location: Da UP Posts: 1,962	Re: Front Body For 2000 EZgo txt Dang, that’s about what, a three hour drive? I’m jealous- our grocery trip is an hour and half each way!

03-12-2019, 06:30 PM	#5
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,138	Re: Front Body For 2000 EZgo txt You should be able to find one at a local cart shop but $25 is a good price. You may also want to look at the other cowls available. Yours, the ST, the 4 series and the newer body styles will all fit.

03-12-2019, 10:27 PM	#6
JRL Gone Wild Join Date: Oct 2010 Posts: 527	Re: Front Body For 2000 EZgo txt Didn't know about the interchangeability. Interesting. As of the moment, I bought a new painted front from AMZ for less than $200 bucks. Anxious to see it. Be here tomorrow. Already in Charlotte. That's the pic above. I know zero about golf carts. I know about motorcycles. I've essentially set a Ezgo txt onto a modified Kaw 750 Brute Force engine mounted in a Kaw Prairie 700 farm. Wanted the solid rear axle for stability. I plan to slip this thing into music festivals. They'll allow golf carts, gas or electric, but no ATV or UTV. It looks like a lifted TxT....really lifted. Thanks for the info! I may yet need a front?
JRL Gone Wild Join Date: Oct 2010 Posts: 527

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-13-2019, 08:59 PM	#9
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,138	Re: Front Body For 2000 EZgo txt Sweet!!

03-13-2019, 09:20 PM	#10
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: Front Body For 2000 EZgo txt Really Nice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Clearance problem with long travel & front body on 2000 CC. Any one run into this?	Lifted Golf Carts
84 electric club cart front body, on 2000 gasoline turf 1?	Gas Club Car
Front axle replacement - 2000 ezgo txt	Gas EZGO
body off paint project 2000 ezgo	Electric EZGO
looking for a ezgo front body	Golf Carts and Parts