Free ezgo stuff

CP241

I'd rather it go to someone here. All good useable stuff. The junk is on my trailer headed to the scrap yard in the morning.

Free. Dont want nothing for it. Getting ready to move so clearing stuff out. Heres what I've got. I'd much rather not hassle with shipping so priority would go to someone local (south Georgia, near brunswick) but I'll ship on your dime.

Ezgo pre-MCI 295 block and side cover. Used but useable. Should be perfectly fine without boring the cylinders. I didn't even attempt to rebuild the motor. I installed a lifan 15hp motor in that cart and still driving it around

Pre-MCI 295 crankshaft. Didnt are any scoring or anything bad, but the previous owner used a DIY clutch puller and jammed the hell out of the threaded end. You'll need to cut it off, drill it out and re-tap the hole.

2002-up transmission shift cable (single cable style). Works fine, with the shifter and the complete plate it mounts to.

Pre-MCI 295 muffler. Previous owner cut it off a few inches behind the flange of the muffler (on the pipe) but could be welded back together for a very easy fix.

Pre-MCI 295 exhaust manifold

Complete front axle from a 2007 workhorse mpt1200 (not lifted). Hub to hub, the wheels with junk tires still.bolted on. One of the tabs on the steering rack is cracked/broken but it was otherwise tight steering before I cut it off at the leaf springs.

Workhorsr/ST front cowl. Its spray painted and not in great shape but wouldnt take a whole lot to make it look nice. I've fixed worse.

Just trying to get rid of the big things. I'm sure I have some other stuff but this is what I've got off the top of my head :)

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

CP241

Shifter cable and plate is gone

CP241

A few pictures :)

The cylinder isnt messed up, I put oil in them to keep them from rusting while sitting and those are smudges :)

Attached Images

	20200131_181452.jpg (286.1 KB, 0 views)
	20200131_181331.jpg (227.4 KB, 0 views)
	20191212_120650.jpg (168.3 KB, 0 views)
	20191212_132827.jpg (211.6 KB, 0 views)
	20200123_164023.jpg (487.0 KB, 0 views)

kgsc

It would be dangerous if I lived closer to you. We would be swapping stuff all the time!!

CP241

You arent that far from me buddy. Come on down

Augusta is a little over 2 hours. I used to commute to Jacksonville every day, 2 hours each way. Wasnt real fun but not too bad either.

kgsc

If my truck was behaving I would consider it but she is being bad. Definitely needs a set of tires and on that truck that’s a $1400 bill. Also like you I have too much “stuff” now.

dirtyyoda77

I’ll take the side cover shipping address would be to 34434 also if you have crank and balancer spacers and the exhaust manifold would be great

Just let me know how you would like payment

Do you think $50 would be good enough for everything

webn237

What would shipping be to 53566 for the mpt1200 front axle? I just need the axle itself.

Sent from my SM-N970U using Tapatalk

CP241

Sorry guys, hang tight. Been a busy weekend with kids birthdays and stuff. Some may be spoken for some may not, I'll update once I'm able to get some shipping quotes.

dirtyyoda77

10-4 just keep us updated