I need a factory clubcar exhaust

jahaiap · 08-02-2009, 10:43 AM

I need this exhaust if anyone has one they want to get rid of. maybe someone who has done a bigblock swap? I borrowed this pic from CClingmas ''another clone build'' thread.

James

4vertical · 08-02-2009, 03:28 PM

what year are you looking for? there are variations in years and in motors.

-Aaron

jahaiap · 08-02-2009, 06:00 PM

Im not really sure the year, but it needs to match the pic above. The pic is a 96 and it bolts right up to the clone motor, thats what I need it to do. Mine is a 90 and its nothing like that and the flanges are wrong.

thanks
james

scottyb · 08-02-2009, 06:21 PM

I don't think they are a straight bolt up application..... the flange is not the same and the original angle leaves the muffler sticking up in the air too much. When I did the clone thiong I had to redrill the flange and reweld it at the correct angle. pretty much a make over

jahaiap · 08-02-2009, 06:41 PM

ok, I think I will just stick to making a new flange and a custom exhaust then. The replies to the original post made it sound like it was a direct bolt in.

Thanks,
James

jahaiap · 08-02-2009, 06:43 PM

Quote:

Originally Posted by scottyb

I don't think they are a straight bolt up application..... the flange is not the same and the original angle leaves the muffler sticking up in the air too much. When I did the clone thiong I had to redrill the flange and reweld it at the correct angle. pretty much a make over

How did that muffler work out with the clone?

08-02-2009, 10:43 AM	#1
jahaiap Getting Wild Join Date: Jan 2009 Location: Naples, FL Posts: 143	I need a factory clubcar exhaust I need this exhaust if anyone has one they want to get rid of. maybe someone who has done a bigblock swap? I borrowed this pic from CClingmas ''another clone build'' thread. James

08-02-2009, 03:28 PM	#2
4vertical Gone Wild Join Date: Jan 2007 Location: La Porte Indiana Posts: 1,392	Re: I need a factory clubcar exhaust what year are you looking for? there are variations in years and in motors. -Aaron

08-02-2009, 06:00 PM	#3
jahaiap Getting Wild Join Date: Jan 2009 Location: Naples, FL Posts: 143	Re: I need a factory clubcar exhaust Im not really sure the year, but it needs to match the pic above. The pic is a 96 and it bolts right up to the clone motor, thats what I need it to do. Mine is a 90 and its nothing like that and the flanges are wrong. thanks james

08-02-2009, 06:41 PM	#5
jahaiap Getting Wild Join Date: Jan 2009 Location: Naples, FL Posts: 143	Re: I need a factory clubcar exhaust ok, I think I will just stick to making a new flange and a custom exhaust then. The replies to the original post made it sound like it was a direct bolt in. Thanks, James

Similar Threads
Thread	Forum
Club car factory wheels	Design Center
E-Z-GO Factory Rear Seat	Golf Carts and Parts
G1 Factory Look Light Kit Any Suggestions	Gas Yamaha
wanted factory ezgo parts	Golf Carts and Parts
Genuine Ezgo Factory light bar	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum