White Rodgers Solenoid for Yamaha

roady89 · 09-05-2010, 10:34 PM

White Rodgers Solenoid

for Yamaha G1

12-volts, 6-terminals, silver contacts part #124-305111
Contact Material: Silver Alloy
Duty Cycle: Continuous

These solenoids are Used 0n: Yamaha 2-cycle gas, 82-89 (G1) and could be used on other gas carts that need a continuous duty solenoid. Yamaha OEM Part Numbers -J17-81950-00, J17-81950-01, J14-81950-01, J17-81950-10

2 of these can be paired to make a F/R contactor for electric carts. The control circuit must be on 12 volts. http://www.buggiesgonewild.com/elect...vated-f-r.html

$25 each plus $11 USPS Flat Rate shipping. Again, price is for 1 solenoid, I have 4 solenoids total.
These retail for around $80. I prefer to sell in pairs and you'll know both your solenoids are good.

These have never been used, just been sitting in a box waiting to be placed in service. Stickers are scratched a bit but no physical damage.

The '0" stamped on the case of this WHITE-ROGERS/RBM solenoid, designates the circuit 'OPEN" end. When installing this solenoid next to an original Yamaha solenoid on a 1982 & G1 car, this solenoid should face the OPPOSITE way of the Yamaha solenoid, so that both OPEN ends are side by side.

White Rodgers solenoid

OLD MEC · 09-06-2010, 10:01 AM

NOTE Also very usefull for F&R conversions with 6 posts in HD high voltage applications where cart voltage is in 48 volt pack AND UP by adding a rocker type switch, but all controls are 12 volt ( REQUIRES 2 ).

roady89 · 09-06-2010, 10:44 AM

Quote:

Originally Posted by OLD MEC

NOTE Also very usefull for F&R conversions with 6 posts in HD high voltage applications where cart voltage is in 48 volt pack AND UP by adding a rocker type switch, but all controls are 12 volt ( REQUIRES 2 ).

Yea, I was going to add that info. Thats why I picked them up when I saw them. When I ran the part numbers I found they were Yamaha G1 solenoids. Takes 2 per cart.

midknight_rndzvs · 09-03-2011, 10:17 AM

Still have a pair available?

midknight_rndzvs@hotmail.com

roady89 · 09-03-2011, 10:45 AM

Actually yes, yes I do.

lister34117 · 09-21-2011, 08:56 AM

Roady, might be a dumb question, did you sell the last pair or do you still have 1 left. thanks

painter377 · 10-16-2011, 08:29 PM

Do you have any of these solenoids left?

09-05-2010, 10:34 PM	#1
roady89 nimda Join Date: Jun 2007 Posts: 13,022	White Rodgers Solenoid for Yamaha White Rodgers Solenoid for Yamaha G1 12-volts, 6-terminals, silver contacts part #124-305111 Contact Material: Silver Alloy Duty Cycle: Continuous These solenoids are Used 0n: Yamaha 2-cycle gas, 82-89 (G1) and could be used on other gas carts that need a continuous duty solenoid. Yamaha OEM Part Numbers -J17-81950-00, J17-81950-01, J14-81950-01, J17-81950-10 2 of these can be paired to make a F/R contactor for electric carts. The control circuit must be on 12 volts. http://www.buggiesgonewild.com/elect...vated-f-r.html $25 each plus $11 USPS Flat Rate shipping. Again, price is for 1 solenoid, I have 4 solenoids total. These retail for around $80. I prefer to sell in pairs and you'll know both your solenoids are good. These have never been used, just been sitting in a box waiting to be placed in service. Stickers are scratched a bit but no physical damage. The '0" stamped on the case of this WHITE-ROGERS/RBM solenoid, designates the circuit 'OPEN" end. When installing this solenoid next to an original Yamaha solenoid on a 1982 & G1 car, this solenoid should face the OPPOSITE way of the Yamaha solenoid, so that both OPEN ends are side by side.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

09-06-2010, 10:01 AM	#2
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: White Rodgers Solenoid for Yamaha NOTE Also very usefull for F&R conversions with 6 posts in HD high voltage applications where cart voltage is in 48 volt pack AND UP by adding a rocker type switch, but all controls are 12 volt ( REQUIRES 2 ).

09-03-2011, 10:17 AM	#4
midknight_rndzvs Not Yet Wild Join Date: Sep 2011 Posts: 1	Re: White Rodgers Solenoid for Yamaha Still have a pair available? midknight_rndzvs@hotmail.com

09-03-2011, 10:45 AM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: White Rodgers Solenoid for Yamaha Actually yes, yes I do.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

09-21-2011, 08:56 AM	#6
lister34117 Not Yet Wild Join Date: Jul 2010 Posts: 1	Re: White Rodgers Solenoid for Yamaha Roady, might be a dumb question, did you sell the last pair or do you still have 1 left. thanks
lister34117 Not Yet Wild Join Date: Jul 2010 Posts: 1

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-16-2011, 08:29 PM	#7
painter377 Not Yet Wild Join Date: Aug 2011 Posts: 2	Re: White Rodgers Solenoid for Yamaha Do you have any of these solenoids left?
painter377 Not Yet Wild Join Date: Aug 2011 Posts: 2

Similar Threads
Thread	Forum
Anyone using White Rogers 586 Solenoid on 400 A Controller?	Electric Club Car
White Rodgers Reverse Contactor hook-up	Electric Club Car
Need Tech Support Phone# For White Rodgers	Electric EZGO
white rodgers wiring	Electric EZGO
Yamaha G9 solenoid	Golf Carts and Parts