Mid to late 90's workhorse

blake80

MY BROTHER AND I STARTED REBUILDING THIS WORKHORSE, NOT SURE WHAT YEAR IT IS, BUT I KNOW ITS GOING TO BE BETWEEN '96 TO 2000. IT IS A GAS CART, BUT HAS NO ENGINE. THE FRAME WAS IN BAD SHAPE WHEN WE PURCHASED IT, BUT I HAVE REPAIRED EVERTHING ON THE FRAME THAT NEEDED REPAIR. THE BODY IS IN GOOD SHAPE, JUST NEEDS A PAINT JOB. IT WILL NEED NEW BRAKES FRONT TO BACK, ENGINE AND FRONT LEAF SPRINGS AND BUSHINGS FOR THE REAR LEAFS. THE FRAME HAS BEEN PAINTED AND READY TO GO. THE CART IS IN PIECES. YOU WILL NEED TO PUT IT BACK TOGETHER.
THE REAR END HAS BEEN CLEANED AND MOSTLY PAINTED. I DID REMOVE THE LEAF PLATE FROM THE AXLE BECAUSE WE WERE GOING TO PUT THE ALLSPORT HIGH 5 LIFT ON IT.

WE WOULD LIKE TO SELL IT WHOLE AT A FAIR PRICE. I KNOW ITS OLDER AND NEEDS A LOT OF PARTS. BUT, IM TIRED OF IT SITTING AT THE HOUSE WITH NO PROGRESS. IT WILL MAKE A GREAT PROJECT SOMEONE TO BUILD WHAT THEY WANT, THATS WHAT WE WERE GOING TO DO BUT THINGS CHANGE.
HERE IS A LINK TO THE CART WHEN WE GOT IT AND THE REPAIRS I MADE TO THE FRAME.
MAKE ME A REASONABLE OFFER ON IT. DO NOT TRY AND LOW BALL ME. DONT WASTE MY TIME OR YOURS.

http://www.buggiesgonewild.com/membe...e-project.html

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

csason

The all caps is a little rough Blake, but as for the Workhorse..

That is a great frame and setup..

The 1200 Workhorse frame is it.

blake80

sorry about the all caps. but at work, we do everything in caps so i never turn it off. way to much stuff that i do is case sensitive.

i think this work horse is a 800, but, the vin plate was gone when i got it.

csason

Nope..
It may have been labeled that...but it has the ten inch space between the
engine housing and the front mount of the engine, which the 800 the front mount is right up against the housing like a TXT or whatever.

The frame you have uses the longer everything and heavier duty
..the back dump bed is a little bit bigger also. I think..
It is a great frame..

blake80

makes sense. we did measure the frame and it is 10" longer than a txt. as you saw in the pics, i had to rebuild most all of the front end of the frame. the rear of the frame was in great shape. but, we have sand blasted and painted the whole frame.

victorjohn

That would be an 1100. 350cc.

blake80

ok guys, sorry, but i have to pull this. my brother told me today that he has decided to order the 24hp motor kit from CPP.

csason

Excellent !

blake80

i hope he actually orders it, maybe i can convince him to let me put the big block in my cart and ill give him my motor