|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
07-26-2011, 06:44 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Wanted: EZGO ST 4x4 Parts or sell mine
I want to buy EZGO ST 4x4 parts. Any and all. I'll take an entire buggy if necessary. Parts are getting so hard to find. I don't need an engine.
I'll sell mine to you if you want it. It's a 2007. The engine hour meter doesn't work. It's got the 18 hp Honda. I've just finished sand blasting and painting all under seat structural pieces and the roll cage. I had new body panels fabricated out of thicker steel because the old one's were rotten. I also replaced all nuts and bolts with stainless steel. Everything works. I just cleaned and serviced the clutch and put a new belt on. I also sprayed the undercarriage with a rubber undercoat. It needs new shocks and a small bit of attention payed to the rear end paint and preservation. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2011, 08:00 PM | #2 |
THE CUSTOM KID
Join Date: Oct 2008
Location: Tallahassee Florida
Posts: 820
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
pictures will not sell if we cant see it
|
07-27-2011, 08:27 PM | #3 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
I'd prefer to buy parts, but thanks for the advice. I haven't gotten all of the body panels back on it yet, so It's not really officially for sale. I find so few posts for the ST 4x4 I kind of jumped the gun, not really expecting much interest. If anyone is really interested shoot me a PM and I can send pictures as of right then, until it's done.
|
07-27-2011, 10:23 PM | #4 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
I would be interested in the cart depending on the price and where you are located..... As for the parts, as far as I know, they are all available still from any E-Z-GO dealer.
Oh and just an FYI... the only difference between the E-Z-GO 18 HP Honda motor and the Club Car 20 HP Honda motor is the Carb..... install a carb jet from a Club Car and your motor increases to 20 HP......... |
07-28-2011, 06:57 AM | #5 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
I'm in Lenoir NC, and honestly there are so few of these things floating around, that I don't actually know what it's worth. NADA doesn't have a value and I haven't seen the sale price from any on ebay or other sites. I've got right at $3400 in it right now, which might be a lofty goal to recuperate. I should have it put back together and painted hopefully this weekend, so I'll get some pictures up. I'm still waiting on the body parts from the shop.
Also I've called my EZGO dealer twice now, and both times he couldn't get the part that I needed. That's what prompted this thread. I need a CVT cover. Mine's cracked and I'm getting a lot of dust in my clutch, and it was starting to corrode. When I do find parts they're outrageous. Maybe I'm just cheap, but $28 for a fuel filter seems unreasonable. Anyway, if anyone is seriously interested in buying it and willing to drive to NC, send me a PM and I'll send you some pictures. I travel a good bit between Western NC, Myrtle Beach SC, Charleston SC, and Atlanta GA so I could probably deliver for a small fee. rabbitreborn, I have a friend in Gainesville so we might be able to work something out also. Just let me know. |
07-28-2011, 07:02 AM | #6 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
Also, thanks for the 20 hp Club Car tip. 18hp is plenty for what I'm using it for but more is alway better. I'll look into it. Do you happen to have a part number handy?
Thanks, Matt |
07-29-2011, 01:53 AM | #7 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
Here are some before pictures. The rocker sills will be aluminum diamond plate, and I haven't decided on what color the new body panels will be.
|
07-29-2011, 07:17 AM | #8 |
Not Yet Wild
Join Date: Feb 2010
Posts: 10
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
PM me the stuff you need. I will see what I can do. Have a couple avenues of getting parts.
|
08-05-2011, 09:18 PM | #9 |
Not Yet Wild
Join Date: Apr 2011
Posts: 33
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
Update.
Finally got parts back from shop. Started putting it back together today. The clutch was cleaned up. I put a stainless steel plate under the fuel tank and all nuts and bolts are stainless also. |
08-05-2011, 11:31 PM | #10 | |
Getting Wild
Join Date: Oct 2009
Posts: 133
|
Re: Wanted: EZGO ST 4x4 Parts or sell mine
Quote:
Is there any way to patch your cover? |
|
Tags |
4x4, ezgo, honda, st4x4 |
|
|
Similar Threads | ||||
Thread | Forum | |||
converting to 48 volt in need of parts and selling mine | Golf Carts and Parts | |||
WANTED - Gas EZGO For Parts | Golf Carts and Parts | |||
wanted factory ezgo parts | Golf Carts and Parts | |||
Wanted 1980 ezgo parts!! | Golf Carts and Parts | |||
ezgo parts wanted | Golf Carts and Parts |