Wanted: EZGO ST 4x4 Parts or sell mine

ml41887 · 07-26-2011, 06:44 PM

I want to buy EZGO ST 4x4 parts. Any and all. I'll take an entire buggy if necessary. Parts are getting so hard to find. I don't need an engine.

I'll sell mine to you if you want it. It's a 2007. The engine hour meter doesn't work. It's got the 18 hp Honda. I've just finished sand blasting and painting all under seat structural pieces and the roll cage. I had new body panels fabricated out of thicker steel because the old one's were rotten. I also replaced all nuts and bolts with stainless steel. Everything works. I just cleaned and serviced the clutch and put a new belt on. I also sprayed the undercarriage with a rubber undercoat. It needs new shocks and a small bit of attention payed to the rear end paint and preservation.

custom carts · 07-27-2011, 08:00 PM

pictures will not sell if we cant see it

ml41887 · 07-27-2011, 08:27 PM

I'd prefer to buy parts, but thanks for the advice. I haven't gotten all of the body panels back on it yet, so It's not really officially for sale. I find so few posts for the ST 4x4 I kind of jumped the gun, not really expecting much interest. If anyone is really interested shoot me a PM and I can send pictures as of right then, until it's done.

rabbitreborn · 07-27-2011, 10:23 PM

I would be interested in the cart depending on the price and where you are located..... As for the parts, as far as I know, they are all available still from any E-Z-GO dealer.

Oh and just an FYI... the only difference between the E-Z-GO 18 HP Honda motor and the Club Car 20 HP Honda motor is the Carb..... install a carb jet from a Club Car and your motor increases to 20 HP.........

ml41887 · 07-28-2011, 06:57 AM

I'm in Lenoir NC, and honestly there are so few of these things floating around, that I don't actually know what it's worth. NADA doesn't have a value and I haven't seen the sale price from any on ebay or other sites. I've got right at $3400 in it right now, which might be a lofty goal to recuperate. I should have it put back together and painted hopefully this weekend, so I'll get some pictures up. I'm still waiting on the body parts from the shop.

Also I've called my EZGO dealer twice now, and both times he couldn't get the part that I needed. That's what prompted this thread. I need a CVT cover. Mine's cracked and I'm getting a lot of dust in my clutch, and it was starting to corrode. When I do find parts they're outrageous. Maybe I'm just cheap, but $28 for a fuel filter seems unreasonable.

Anyway, if anyone is seriously interested in buying it and willing to drive to NC, send me a PM and I'll send you some pictures. I travel a good bit between Western NC, Myrtle Beach SC, Charleston SC, and Atlanta GA so I could probably deliver for a small fee. rabbitreborn, I have a friend in Gainesville so we might be able to work something out also. Just let me know.

ml41887 · 07-28-2011, 07:02 AM

Also, thanks for the 20 hp Club Car tip. 18hp is plenty for what I'm using it for but more is alway better. I'll look into it. Do you happen to have a part number handy?

Thanks,

Matt

ml41887 · 07-29-2011, 01:53 AM

Here are some before pictures. The rocker sills will be aluminum diamond plate, and I haven't decided on what color the new body panels will be.

bbeckwor · 07-29-2011, 07:17 AM

PM me the stuff you need. I will see what I can do. Have a couple avenues of getting parts.

ml41887 · 08-05-2011, 09:18 PM

Update.

Finally got parts back from shop. Started putting it back together today. The clutch was cleaned up. I put a stainless steel plate under the fuel tank and all nuts and bolts are stainless also.

garydee · 08-05-2011, 11:31 PM

Quote:

When I do find parts they're outrageous.

This is true, but like most of these "off road" vehicles, wither its a Polaris or even a Jeep, it's all expensive. I just had to purchase a replacement rear brake line for mine. It's one piece stainless steel braided line - $143 - ouch!

Is there any way to patch your cover?

07-26-2011, 06:44 PM	#1
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33	Wanted: EZGO ST 4x4 Parts or sell mine I want to buy EZGO ST 4x4 parts. Any and all. I'll take an entire buggy if necessary. Parts are getting so hard to find. I don't need an engine. I'll sell mine to you if you want it. It's a 2007. The engine hour meter doesn't work. It's got the 18 hp Honda. I've just finished sand blasting and painting all under seat structural pieces and the roll cage. I had new body panels fabricated out of thicker steel because the old one's were rotten. I also replaced all nuts and bolts with stainless steel. Everything works. I just cleaned and serviced the clutch and put a new belt on. I also sprayed the undercarriage with a rubber undercoat. It needs new shocks and a small bit of attention payed to the rear end paint and preservation.
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33

07-27-2011, 08:00 PM	#2
custom carts THE CUSTOM KID Join Date: Oct 2008 Location: Tallahassee Florida Posts: 820	Re: Wanted: EZGO ST 4x4 Parts or sell mine pictures will not sell if we cant see it

07-27-2011, 08:27 PM	#3
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33	Re: Wanted: EZGO ST 4x4 Parts or sell mine I'd prefer to buy parts, but thanks for the advice. I haven't gotten all of the body panels back on it yet, so It's not really officially for sale. I find so few posts for the ST 4x4 I kind of jumped the gun, not really expecting much interest. If anyone is really interested shoot me a PM and I can send pictures as of right then, until it's done.
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33

07-27-2011, 10:23 PM	#4
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: Wanted: EZGO ST 4x4 Parts or sell mine I would be interested in the cart depending on the price and where you are located..... As for the parts, as far as I know, they are all available still from any E-Z-GO dealer. Oh and just an FYI... the only difference between the E-Z-GO 18 HP Honda motor and the Club Car 20 HP Honda motor is the Carb..... install a carb jet from a Club Car and your motor increases to 20 HP.........

07-28-2011, 06:57 AM	#5
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33	Re: Wanted: EZGO ST 4x4 Parts or sell mine I'm in Lenoir NC, and honestly there are so few of these things floating around, that I don't actually know what it's worth. NADA doesn't have a value and I haven't seen the sale price from any on ebay or other sites. I've got right at $3400 in it right now, which might be a lofty goal to recuperate. I should have it put back together and painted hopefully this weekend, so I'll get some pictures up. I'm still waiting on the body parts from the shop. Also I've called my EZGO dealer twice now, and both times he couldn't get the part that I needed. That's what prompted this thread. I need a CVT cover. Mine's cracked and I'm getting a lot of dust in my clutch, and it was starting to corrode. When I do find parts they're outrageous. Maybe I'm just cheap, but $28 for a fuel filter seems unreasonable. Anyway, if anyone is seriously interested in buying it and willing to drive to NC, send me a PM and I'll send you some pictures. I travel a good bit between Western NC, Myrtle Beach SC, Charleston SC, and Atlanta GA so I could probably deliver for a small fee. rabbitreborn, I have a friend in Gainesville so we might be able to work something out also. Just let me know.
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-28-2011, 07:02 AM	#6
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33	Re: Wanted: EZGO ST 4x4 Parts or sell mine Also, thanks for the 20 hp Club Car tip. 18hp is plenty for what I'm using it for but more is alway better. I'll look into it. Do you happen to have a part number handy? Thanks, Matt
ml41887 Not Yet Wild Join Date: Apr 2011 Posts: 33

07-29-2011, 07:17 AM	#8
bbeckwor Not Yet Wild Join Date: Feb 2010 Posts: 10	Re: Wanted: EZGO ST 4x4 Parts or sell mine PM me the stuff you need. I will see what I can do. Have a couple avenues of getting parts.
bbeckwor Not Yet Wild Join Date: Feb 2010 Posts: 10

Similar Threads
Thread	Forum
converting to 48 volt in need of parts and selling mine	Golf Carts and Parts
WANTED - Gas EZGO For Parts	Golf Carts and Parts
wanted factory ezgo parts	Golf Carts and Parts
Wanted 1980 ezgo parts!!	Golf Carts and Parts
ezgo parts wanted	Golf Carts and Parts