need a wiring harness for dcs

sonnysmith · 07-24-2013, 12:29 PM

Like the post says I need a wiring harness for a 1995 DCS. Someone cut the controller plug in off.
It there a way to fix this problem with out complete wiring harness?? I am going to use an alltrax controller.

Thanks
Sonny

Andy4639 · 07-24-2013, 02:34 PM

Alltrax sells the adapter just hook it up with butt connectors should do it. Use their digram for it.

scottyb · 07-24-2013, 02:39 PM

Quote:

Originally Posted by Andy4639

Alltrax sells the adapter just hook it up with butt connectors should do it. Use their digram for it.

Andy are you thinking of the spade connectors on the AXE control? I think he is asking about the DCX 10 pin molex connector

sonnysmith · 07-24-2013, 09:04 PM

I'm sorry, it is the 10 pin connector that was cut off.

Sonny

scotter · 07-25-2013, 01:19 AM

Solder and heat shrink tubing for insulation?

sonnysmith · 07-25-2013, 06:58 PM

thanks I may try that.
Sonny

Andy4639 · 07-28-2013, 09:19 AM

Yes I was, but even for the 10 pin he could buy the connectors at radio shack and make it work. I think to he could order the 10 pin connector and get to work with some soldering.

He could order this and splice it in to what he has and should be go to go.

http://www.alltraxinc.com/images/015_15-s.jpg

07-24-2013, 12:29 PM	#1
sonnysmith Gone Wild Join Date: Jan 2012 Location: Conway,Arkansas 72032 Posts: 775	need a wiring harness for dcs Like the post says I need a wiring harness for a 1995 DCS. Someone cut the controller plug in off. It there a way to fix this problem with out complete wiring harness?? I am going to use an alltrax controller. Thanks Sonny

07-24-2013, 02:34 PM	#2
Andy4639 48/400/Alltrax HS motor Join Date: Jan 2007 Location: Liberty SC, Garden City SC Posts: 6,190	Re: need a wiring harness for dcs Alltrax sells the adapter just hook it up with butt connectors should do it. Use their digram for it.

07-24-2013, 09:04 PM	#4
sonnysmith Gone Wild Join Date: Jan 2012 Location: Conway,Arkansas 72032 Posts: 775	Re: need a wiring harness for dcs I'm sorry, it is the 10 pin connector that was cut off. Sonny

07-25-2013, 01:19 AM	#5
scotter Gone Wild Join Date: Jun 2013 Location: San Clemente, CA Posts: 259	Re: need a wiring harness for dcs Solder and heat shrink tubing for insulation?

07-25-2013, 06:58 PM	#6
sonnysmith Gone Wild Join Date: Jan 2012 Location: Conway,Arkansas 72032 Posts: 775	Re: need a wiring harness for dcs thanks I may try that. Sonny

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-28-2013, 09:19 AM	#7
Andy4639 48/400/Alltrax HS motor Join Date: Jan 2007 Location: Liberty SC, Garden City SC Posts: 6,190	Re: need a wiring harness for dcs Yes I was, but even for the 10 pin he could buy the connectors at radio shack and make it work. I think to he could order the 10 pin connector and get to work with some soldering. He could order this and splice it in to what he has and should be go to go. http://www.alltraxinc.com/images/015_15-s.jpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Wiring Harness Help	Electric EZGO
Need a Wiring Harness for a G9	Gas Yamaha
Wiring Harness	Electric EZGO
g 16a wiring harness	Gas Yamaha
wiring harness id, PLEASE HELP	Electric EZGO