|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
01-04-2014, 11:21 PM | #1 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
WTB Generac/Dixie Chopper Charging System
I purchased a couple Generac GT990 complete engines from Lurch here on the forum.
I've since found that they don't have a charging system and since I'm installing one in a cart I need one. I'm also told that the charging system from a 990 or a 760 will fit. I need to find one to fit the engine. I already have everything else I need to install and get a cart running with this setup so only need this to get the engine together and get started setting this up in a new home/cart. Any help is appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-05-2014, 03:51 PM | #2 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: WTB Generac/Dixie Chopper Charging System
Hey Dawg I was just going to put a GM Alt. on it and run it from either side of the crank. There's several post on here about doing that. I did not look for a used charging system but a new one is crazy high. One of the guys that have the genarac on here used the Atl. and one bought a used genarac system. Wish you luck and I did think you new this, Sorry.
|
01-06-2014, 07:42 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: WTB Generac/Dixie Chopper Charging System
Lurch, I remember your mentioning it. It's not a problem and you have no reason to be sorry. You gave me a great deal on it and I'm more than happy with what I got from you. So no worries.
I'll have to take a look at possibly adding an alternator if I can't find the parts made for this motor. I have however decided too purchase a new crank rather than trying to make the taper adapter work. I figure with the HP and torque this motor will put out that I'd rather be safe than sorry. Plus the straight crank is a little long which may allow for mounting a pulley for and alternator. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
charging system | Gas EZGO | |||
BLS Charging system 48v | Electric Club Car | |||
Charging System | Big Block Talk! | |||
charging system | Gas EZGO |